Installing u-boot on sbc8260 via ethernet using minicom

Installing u-boot on sbc8260 via ethernet using minicom

[federicosibilio]

i've tryed to install u-boot using minicom, but i'm not able to=20
configure in shell boot params,=20
using this...

boot device          : motfcc
unit number          : 0
processor number     : 0
host name            : motfcc0
inet on ethernet (e) : 192.168.0.4
inet on backplane (b): 192.168.0.4
host inet (h)        : 192.168.0.3
gateway inet (g)     : 192.168.0.3
flags (f)            : 0x80
target name (tn)     : sbc8260

when i reboot target it appears in minicom the message below:

AT S7=3D45 S0=3D0 L1 V1 X4 &c1 E1 Q0
0x1f058b0 (tBoot): miiPhyInit check cable connection
Attached TCP/IP interface to motfcc0.
Warning: no netmask specified.
Attaching network interface lo0... done.
Loading... Erroneous header read

Error loading file: errno =3D 0x610001.
Can't load boot file!!
=C3=BC

my questions are?
what file must i put into target?(u-boot.bin?)
in which way can i upload it?(using tftp with 192.168.0.4 and using=20
put command, it gives timeout for transmission, but ping to=20
192.168.0.3=20
works normally until in minicom appears error message)

Please help me to configure and install u-boot
thanks very much!!!


Naviga e telefona senza limiti con Tiscali    =20
Scopri le promozioni Tiscali adsl: navighi e telefoni senza canone Telecom

http://abbonati.tiscali.it/adsl/