From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Received: from wproxy.gmail.com (wproxy.gmail.com [64.233.184.199]) by ozlabs.org (Postfix) with ESMTP id 1BC462BDA0 for ; Tue, 26 Oct 2004 07:13:48 +1000 (EST) Received: by wproxy.gmail.com with SMTP id 43so92105wri for ; Mon, 25 Oct 2004 14:13:47 -0700 (PDT) Message-ID: <35fb2e59041025140776cfe174@mail.gmail.com> Date: Mon, 25 Oct 2004 22:07:07 +0100 From: Jon Masters To: Peter Ryser In-Reply-To: <417D2B5E.8050200@xilinx.com> Mime-Version: 1.0 Content-Type: text/plain; charset=US-ASCII References: <1098701468l.31592l.0l@ipnnarval> <417D2B5E.8050200@xilinx.com> Cc: linuxppc-embedded@ozlabs.org Subject: Re: uboot and ppc405 Reply-To: jonathan@jonmasters.org List-Id: Linux on Embedded PowerPC Developers Mail List List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , On Mon, 25 Oct 2004 09:35:42 -0700, Peter Ryser wrote: > please have a look at "Getting started with U-Boot and ML300" > http://www.xilinx.com/bvdocs/appnotes/xapp542.pdf that describes how to > use U-Boot with Xilinx Virtex-II Pro devices. This appnote assumes that he's using the ML300, has the Montavista tree, and a few other general assumptions that might well not be true here, but is otherwise interesting if they decide to heed our suggestions of using the SystemACE in the design. btw Peter, I've been moaning about the weird interrupt behaviour of the SysACE on e.g. the Memec board for some time (see archives for various other people's experiences too) - and I've spoken to several folks at Xilinx without getting very far. If there's a fundamental problem then it probably makes sense for us to help get it fixed. Cheers, Jon.