From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <369645E8.1E56FCF8@jlc.net> Date: Fri, 08 Jan 1999 12:52:41 -0500 From: Dan Malek MIME-Version: 1.0 To: Marc.Pavese@hec.utah.edu CC: linuxppc-user@lists.linuxppc.org, linuxppc-dev Subject: Re: pcmcia? References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Marc Pavese wrote: > Hi, All - > > Is there a tarball or rpm of the precompiled pcmcia modules... I have built the pcmcia-cs-3.0.3 modules for the 2.1.130 kernel. It just happened to be from one of the SRPMs I had around. I can upload a tarball of the kernel modules when someone points me to a server. You will have to get the rest of the software from another RPM. Just load up the 2.1.125 or 127 RPM and copy these modules into the /lib directory. I (and others I believe) are working on the 3.0.7 version of the pcmcia package. I only have a pcmcia modem and flash cards, so my testing is limited. All I really care about it running PPP on the modem :-). The 3.0.3 version works OK for that. -- Dan [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]