linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
* AtyFB problem solved -> should go into a FAQ or something
@ 1999-01-13  8:20 Jens Ch. Restemeier
  0 siblings, 0 replies; 2+ messages in thread
From: Jens Ch. Restemeier @ 1999-01-13  8:20 UTC (permalink / raw)
  To: linuxppc-dev


Hi !

I solved my problems with atyfb (I hope): The cause for the blank/black
screen was not the driver, but the protection-mechanisms of the monitor
!

My 5500 has a built-in monitor, and I'm normally running vmode 13.
My "normal" boot looked like:

video=ofonly vmode=13

for atyfb I did

video=atyfb vmode=13

It looks like the vmode stuff has changed, because after writing

video=atyfb:vmode:13

it works ! 

Jens

[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]

^ permalink raw reply	[flat|nested] 2+ messages in thread

* Re: AtyFB problem solved -> should go into a FAQ or something
       [not found] <199901140800.CAA24661@lists.linuxppc.org>
@ 1999-01-14 17:12 ` Jon Howell
  0 siblings, 0 replies; 2+ messages in thread
From: Jon Howell @ 1999-01-14 17:12 UTC (permalink / raw)
  To: linuxppc-dev


> Date: Wed, 13 Jan 1999 09:20:21 +0100
> Subject: AtyFB problem solved -> should go into a FAQ or something

So it's been a while since I've given the faqomatic sales pitch. :v)
(This is addressed to the whole community, not the original author
above.)

A couple years ago, I had an answer to a ppp question that I
thought "should go into a FAQ or something." But I was too lazy to start
a FAQ, or even to track down the maintainer of a FAQ. So, instead, I
wrote the faqomatic, so that everybody who comes up with an answer
that "should go into a FAQ or something" can just stuff the answer
in there and forget about it.*

If you've used the linux/powerpc faqomatic, maybe you didn't notice,
but you can add new answers. Find an appropriate category, click [Show
Edit Commands], click [New Answer] at the top of the page. If you
haven't used it before, you will need to create a password (to verify
that your email address is real); then it will ask you for the question
and its answer.

Thanks to all who have contributed to the faqomatic. If everybody puts
in one or two answers, then all of us get to be lazy. :v)

	--Jon

* There are also moderators who watch over various categories in the
FAQ, and make some effort to see that they stay organized. This is much
less effort than a typical FAQ, since you don't have to actually *add*
any answers. If you are interested in moderating a category of the FAQ,
just ask the moderator of the next section up (turn on "show moderator"
in the Appearance page), or ask me.

 Jon Howell  jonh@cs.dartmouth.edu     finger jonh@cs.dartmouth.edu | pgp -kaf
 http://www.cs.dartmouth.edu/~jonh     170AE827  ADAB6559  9C2E3DB3  37BD72EC


[[ This message was sent via the linuxppc-dev mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-dev  if your ]]
[[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]]
[[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]

^ permalink raw reply	[flat|nested] 2+ messages in thread

end of thread, other threads:[~1999-01-14 17:12 UTC | newest]

Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-01-13  8:20 AtyFB problem solved -> should go into a FAQ or something Jens Ch. Restemeier
     [not found] <199901140800.CAA24661@lists.linuxppc.org>
1999-01-14 17:12 ` Jon Howell

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).