From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <36A275C4.8EC0B1E0@wanadoo.fr> Date: Mon, 18 Jan 1999 00:44:04 +0100 From: Martin Costabel MIME-Version: 1.0 To: Adam Sherman CC: linuxppc-dev@lists.linuxppc.org Subject: Re: PC Card Ethernet Support in the Installer References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Adam Sherman wrote: > > Does the installer (pre-R5) have PC Card Ethernet support? Or do I > have to do a HD install. I have a PowerBook 2400c with a Kingston > (NE2000) card. You have to use a kernel with the right driver built in (don't know if this exists for your card). The installer relies on the kernel for this. And it is better to have the driver compiled in the kernel, not as a module, because module loading is not working very well in the pre-R5 installer. -- Martin [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]