From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <36DA3D05.2E16F658@talknet.de> Date: Mon, 01 Mar 1999 07:08:53 +0000 From: Alois Fertl MIME-Version: 1.0 To: "linuxppc-dev@lists.linuxppc.org" Subject: linux-2.2.2 kernel hangs Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: On Saturday I managed to update my kernel sources to 2.2.2 from vger/linux at cvs.samba.org. There was some restructuring on samba and I had to find out how to update my Repository and Root CVS files. This 2.2.2 version has severe problems on a Motorola RiscPC. Actually the kernel hangs within a short time if cpio'ing files from a NFS tree to the local scsi drive. It starts with a message about the nfs server not responding and than endlessly repeats scsi timeouts. Due to my problems with CVS I do not have any of the versions between 2.1.130 and 2.2.2. The 2.1.130 version did not show the problem. Is this a known problem. Did anybody else experiance the same problem. Here is a sample output: nfs: server dino not responding, still trying scsi : aborting command due to timeout : pid 3940, scsi0, channel 0, id 0, lun 0 0x0a 02 ff c0 80 00 ncr53c8xx_abort: pid=3940 serial_number=3947 serial_number_at_timeout=3947 scsi : aborting command due to timeout : pid 3941, scsi0, channel 0, id 0, lun 0 0x0a 03 00 5a 02 00 ncr53c8xx_abort: pid=3941 serial_number=3948 serial_number_at_timeout=3948 ncr53c810-0: abort ccb=c0195020 (cancel) SCSI host 0 abort (pid 3941) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=3941 reset_flags=2 serial_number=3948 serial_number_at_timeout=3948 SCSI host 0 abort (pid 3941) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=3941 reset_flags=2 serial_number=3949 serial_number_at_timeout=3949 SCSI host 0 abort (pid 3941) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=3941 reset_flags=2 serial_number=3951 serial_number_at_timeout=3951 SCSI host 0 abort (pid 3941) timed out - resetting SCSI bus is being reset for host 0 channel 0. ncr53c8xx_reset: pid=3941 reset_flags=2 serial_number=3953 serial_number_at_timeout=3953 [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. To unsubscribe from linuxppc-dev, send ]] [[ the message 'unsubscribe' to linuxppc-dev-request@lists.linuxppc.org ]]