From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <371B000F.A5C5CA84@siemens.at> Date: Mon, 19 Apr 1999 12:06:07 +0200 From: Helmut Buchsbaum MIME-Version: 1.0 To: Magnus Damm CC: linuxppc-dev@lists.linuxppc.org Subject: Re: LinuxPPC on FADS References: <199904151452.QAA26871@kieraycl01.kieraydom> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hello Magnus! Magnus Damm wrote: > > That has been one of my problems since october... =) > > Now is linux running with root on ATA-Flash! This what I'd like to do, too! But what about the 823-PCMCIA controller support? What's your configuration? I once spent some hours to adapt Dan's FADSROM for the 860 to my 823, but unfortunately I didn't succeed due to problems talking to the PCMCIA hardware! > > Question: > > Where can I find information about linux memory management? > Try http://humbolt.geo.uu.nl/Linux-MM/ for a start! -- ********************************************************* * Helmut Buchsbaum * Siemens AG Austria * * Tel: ++43-1-1707-36686 * EZE PN 5 * * Fax: ++43-1-1707-55169 * Erdberger Laende 26 * * * A-1030 Vienna/Europe * ********************************************************* * mailto:Helmut.Buchsbaum@siemens.at * * buc@eze22.siemens.co.at * ********************************************************* [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]