From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <371BBD46.246D9D0F@ibm.net> Date: Mon, 19 Apr 1999 23:33:26 +0000 From: root MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Kernel 2.2.6-ac1 problem Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I compiled the latest kernel from source and I created vmlinux with no problems. After installing it in my system folder on my mac partition and booting linux again, I get I/O errors somewhat randomly. The message that is displayed is "No space left on device". The file /var/log/messages conatins the following lines: Apr 19 23:23:07 localhost kernel: EXT2-fs error (device ide0(3,4)): ext2_new_block: Free blocks count corrupted for block group 13 I had the same problem when compiling and testing the 2.2.5 kernel as well, but I found no other references to a similar problem in the mailing lists and newsgroups. Can anyone help or offer advice? -J. Robokos System config: Powerbase 603, 40MB Ram, Maxtor IDE hard drive (Master), Seagate IDE hard drive (Slave) [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]