From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <373C946C.45802CE6@ibm.net> Date: Fri, 14 May 1999 21:23:56 +0000 From: roboj MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: CDROM Problems with 2.2.9 References: <199905130459.XAA18408@lists.linuxppc.org> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: After compiling the recent linux kernel (2.2.9), I've been getting an error message which I have included below. I get it at boot time and it continues printing in an infinite loop. Also, the computer seems to be trying to access my cd-rom drive (Toshiba scsi, /dev/scd0 linked to /dev/cdrom). Running power computing powerbase. Anyone ever got a similar error message that can offer any suggestions? Everything works ok in linux vers. 2.2.6-ac3. SCSI: aborting command due to timeout pid 3, scsi 0, channel 0, id 1 mesh_abort (c0374000) mesh: state at c0374278, regs at f3010000 dma at f3008000 ct = 0, seq = c , bs = 6000, fc = 0, exc = 0, err = 0, im = 7, int = 0, sp = 2, dma stat = c0, cmdptr = 364010, phase = 0, msgphase = 0, comm_tgt = 1, data_ptr = 0, dma_st = 0, dma_ct = 0, n_msgout = 0 target 1: req = 0374000 goes_out = 0, saved_ptr = 0 SCSI Host 0 abort (pid3) timed out - resetting SCSI bus is being reset for host 0 channel 0 mesh reset 2 mesh: SCSI bus reset detected: waiting for end...done [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]