From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3755DFA8.B871A07E@crosswinds.net> Date: Wed, 02 Jun 1999 21:51:37 -0400 From: Jeremy Welling MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Help! Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I've got a G3 minitower. I can't get it linux to acknowledge the ultra scsi drive. I tried to bypass the builtin scsi by plugging it into the pci scsi card. No help. I've also tried kernels 2.2.1 thru 2.2.7. I started by partitioning the internal drive with the correct partitions. When boot linux through bootX, I go into the redhat installer and it can't find the disk. I drop out to the redhat messages and it says "/proc/scsi/scsi: Attached devices: none". The kernel messages note detecting scsi0 : MESH scsi : 1 host. and no other controllers. If anyone has any input, it would be greatly appreciated. Thanks! Jeremy Welling [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]