From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3757E59D.B18BCA8C@phx.mcd.mot.com> Date: Fri, 04 Jun 1999 07:41:33 -0700 From: Johnnie Peters MIME-Version: 1.0 To: "linuxppc-dev-digest@lists.linuxppc.org" , "linuxppc-dev@lists.linuxppc.org" , Abukhdeir Nasser-ana007 Subject: Re: Support for Motorola Platforms Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hello Abukhdeir Yes we are making new machines. The systems I work on are all PowerPC based and intended for the embedded systems market. Here is a list of the machines (these are engineering names for the most part) this patch will allow LinuxPPC to boot on: Older PCI based machines Comet Blackhark Utah Newer PCI MTX MTX+ VME MVME1600 MVME2300 MVME2400 MVME2600 MVME2700 MVME3600 Compact PCI Mesquite (CPX8216 main processor board) Sitka (CPX8216 slave procesor board) The dual processor MTX series and MVME4600 will boot but only run on one processor. Work is underway to get the second aprocessor going. Motorola has a new version of the MVME2400 with the MAX processor and as soon as I can get my hands on one I will do the work to get Linux to run on it. Plans are also underway for new versions of the MTX series supporting the MAX processor. I invite any inquires about our machines you might have. And please call me Johnnie. I'll never become accostimed to the Mr. Peters stuff. Abukhdeir Nasser-ana007 wrote: > > Mr .Peters: > Sorry for the ignorant question, but is Motorola still making new > machines? What Motorola platform are you talking about? I apologize for > the dumb questions... > > > Nasser [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]