From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <37934F1C.3AC97178@msoe.edu> Date: Mon, 19 Jul 1999 11:15:24 -0500 From: ian reinhart geiser MIME-Version: 1.0 To: Simon Piette CC: LinuxPPC-Dev Subject: Re: SANE References: <37934682.4119BEDF@generation.net> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Simon Piette wrote: > Hi, > > I've try to use SANE on R5. It compiles flawlessly, but I can get it to > work. I discussed a lot with Oliver Rauch, a SANE developper (!), and we > concluded that the problem was either with the scsi generic driver (sg), > or with the scsi driver (53C94). > > I've found two other people unable to use SANE on R5, and I was > wandering if I could find help in this group to make it work. I can > provide you with a lot of details, and three testers! > > Thanks, > > Simon Piette i think the problem lies in the way the the scsi bus attaches and reattaches i found that when ever i ran sane my scanner would get a few bytes and then all of my scsi disks would just go into defib. at this point i was forced to reboot.... -ian reinhart geiser [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]