Re: X : caught signal 11 ?

Re: X : caught signal 11 ?

[Hollis R Blanchard]

On Tue, 20 Jul 1999, Yann Bizeul wrote:
> 
> I've a little bit more informations.
> 1) X caught signal 11 and quits each time I go back to a console.
> 2) X quits each time XScreensaver is launching
> 
> Iuse the XFree server provided by Release 5

I also have problem 1), though I guess I've managed to disable xscreensaver so
X does its built-in blanking thing (with no power saving =( ).

To crash X:
startx
ctrl-cmd-F1

Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7
from wherever you wanted to go in the first place). I'm using platinumfb. Is
anyone else out there able to use virtual consoles without X crashing?

-Hollis


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

Re: X : caught signal 11 ?

[puetzk6715]

Well, I switch on and off all the time (I have 6 console VT's and 2 X
VT's). I used to get palette problems, but not since I applied anthony
tong's patch and rebuilt X. It never died (well, it did in my cobbled
pre-R5, but not in the released LinuxPPC 1999).

On Tue, 20 Jul 1999, Hollis R Blanchard wrote:

> On Tue, 20 Jul 1999, Yann Bizeul wrote:
> > 
> > I've a little bit more informations.
> > 1) X caught signal 11 and quits each time I go back to a console.
> > 2) X quits each time XScreensaver is launching
> > 
> > Iuse the XFree server provided by Release 5
> 
> I also have problem 1), though I guess I've managed to disable xscreensaver so
> X does its built-in blanking thing (with no power saving =( ).
> 
> To crash X:
> startx
> ctrl-cmd-F1
> 
> Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7
> from wherever you wanted to go in the first place). I'm using platinumfb. Is
> anyone else out there able to use virtual consoles without X crashing?
> 
> -Hollis
> 

> 


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

Re: X : caught signal 11 ?

[Hollis R Blanchard]

On Tue, 20 Jul 1999 puetzk6715@uni.edu wrote:

> Well, I switch on and off all the time (I have 6 console VT's and 2 X
> VT's). I used to get palette problems, but not since I applied anthony
> tong's patch and rebuilt X. It never died (well, it did in my cobbled
> pre-R5, but not in the released LinuxPPC 1999).

I see. What video driver are you using? Yann, you too? As I mentioned, I'm
using platinumfb on a PowerCenter 132. I'm wondering if it's the driver. I
just got Mark Abene's updated driver but haven't had a chance to try it yet
(and won't for the rest of the week). For those of you who want to see if it
fixes anything, I've put it up at
http://www.andrew.cmu.edu/~hollis/platinumfb.c

-Hollis



[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

Re: X : caught signal 11 ?

[P. Barrette]

Hollis,
I have the platinumfb too (7200), and I read your message, tried it and
bang, x
was down.  I recompiled the kernel with the new driver (I didn't get it
from your site it was mailed to me) and it is ok now.  I never had this
problem before with fvwm and accel X , maybe it is a Xpmac & the driver?

--------
Paul Barrette
Ph.D. Candidate Classics (Latin Literature)
System Administrator
McMaster University

"Oppositaque ad os manu nescio quid taetrum 
exsibilavit, quod postea Graecum esse affirmabat."
                                      --Petronius

On Tue, 20 Jul 1999, Hollis R Blanchard wrote:

> 
> On Tue, 20 Jul 1999 puetzk6715@uni.edu wrote:
> 
> > Well, I switch on and off all the time (I have 6 console VT's and 2 X
> > VT's). I used to get palette problems, but not since I applied anthony
> > tong's patch and rebuilt X. It never died (well, it did in my cobbled
> > pre-R5, but not in the released LinuxPPC 1999).
> 
> I see. What video driver are you using? Yann, you too? As I mentioned, I'm
> using platinumfb on a PowerCenter 132. I'm wondering if it's the driver. I
> just got Mark Abene's updated driver but haven't had a chance to try it yet
> (and won't for the rest of the week). For those of you who want to see if it
> fixes anything, I've put it up at
> http://www.andrew.cmu.edu/~hollis/platinumfb.c
> 
> -Hollis
> 
> 

> 


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

Re: X : caught signal 11 ?

[Simon Piette]

puetzk6715@uni.edu wrote:

> > On Tue, 20 Jul 1999, Yann Bizeul wrote:
> > >
> > > I've a little bit more informations.
> > > 1) X caught signal 11 and quits each time I go back to a console.
> > > 2) X quits each time XScreensaver is launching
> > >
> > > Iuse the XFree server provided by Release 5
> >
> > I also have problem 1), though I guess I've managed to disable xscreensaver so
> > X does its built-in blanking thing (with no power saving =( ).
> >

I have problem 2), but when I'm disabling xscreensaver! I'm using R5 (final) on
UMAX J700 with an IMS TwinTurbo 128 (2 Mb VRAM) . Power saving does not work in
either ways.

BTW, is anybody knows which arguments to give (for BootX) if I want to remove the
"No video driver" options? I've tried a few combinations (like
video=imsttfb:vmode:17,cmode:16), but even the console is almost unusable. I think
that the only to use the IMS is to check that "No video driver" option.

Simon Piette


[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

imsttfb (was Re: X : caught signal 11 ?)

[Simon Piette]

Ryan Nielsen wrote:

> > BTW, is anybody knows which arguments to give (for BootX) if I want to remove the
> > "No video driver" options? I've tried a few combinations (like
> > video=imsttfb:vmode:17,cmode:16), but even the console is almost unusable. I think
> > that the only to use the IMS is to check that "No video driver" option.
>
> does video=imsttfb:noaccel work?

Unfortunately no. What would be the advantages if I don't get accelleration? Do you
have ans IMS TwinTurbo card?

Simon

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

Re: X : caught signal 11 ?

[Chris Baker]

Hollis R Blanchard wrote:

> On Tue, 20 Jul 1999, Yann Bizeul wrote:
> >
> > I've a little bit more informations.
> > 1) X caught signal 11 and quits each time I go back to a console.
> > 2) X quits each time XScreensaver is launching
> >
> > Iuse the XFree server provided by Release 5
>
> I also have problem 1), though I guess I've managed to disable xscreensaver so
> X does its built-in blanking thing (with no power saving =( ).

I'm assuming you mean something along the lines of

$ xset s off

Does X have a built in blanking thing other than that?  Or is it an Apple hardware
thing?

>
>
> To crash X:
> startx
> ctrl-cmd-F1
>
> Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7
> from wherever you wanted to go in the first place). I'm using platinumfb. Is
> anyone else out there able to use virtual consoles without X crashing?

I can switch consoles o.k. I'm on a pb3400c so I guess that makes me chips65550fb
(?).  If I put the machine to sleep for any significant period of time, X dies.

Is this just an xfree problem or is it in xpmac also?

cheers,

cbb



[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

RE: X : caught signal 11 ?

[Ian Dale]

I know I'm fine on this... Start up into X, the screensaver works fine, and
I have full use of the virtual consoles... Running atyfb on an iMac 333.

-Ian Dale

-----Original Message-----
From: Hollis R Blanchard [mailto:hollis+@andrew.cmu.edu]
Sent: Tuesday, July 20, 1999 9:13 AM
To: Yann Bizeul
Cc: linuxppc-dev@lists.linuxppc.org; linuxppc-user@lists.linuxppc.org
Subject: Re: X : caught signal 11 ?



On Tue, 20 Jul 1999, Yann Bizeul wrote:
> 
> I've a little bit more informations.
> 1) X caught signal 11 and quits each time I go back to a console.
> 2) X quits each time XScreensaver is launching
> 
> Iuse the XFree server provided by Release 5

I also have problem 1), though I guess I've managed to disable xscreensaver
so
X does its built-in blanking thing (with no power saving =( ).

To crash X:
startx
ctrl-cmd-F1

Poof. All gone. If you have xdm set up, xdm reloads (and takes you to vc 7
from wherever you wanted to go in the first place). I'm using platinumfb. Is
anyone else out there able to use virtual consoles without X crashing?

-Hollis


[[ This message was sent via the linuxppc-user mailing list. Replies are ]]
[[ not forced back to the list, so be sure to  Cc linuxppc-user  if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]

[[ This message was sent via the linuxppc-dev mailing list.  Replies are ]]
[[ not  forced  back  to the list, so be sure to Cc linuxppc-dev if your ]]
[[ reply is of general interest. Please check http://lists.linuxppc.org/ ]]
[[ and http://www.linuxppc.org/ for useful information before posting.   ]]