From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3795BF97.C20C7A54@generation.net> Date: Wed, 21 Jul 1999 08:39:51 -0400 From: Simon Piette MIME-Version: 1.0 To: Brian C Burke , LinuxPPC-Dev Subject: Re: SANE References: <199907200502.AAA26510@lists.linuxppc.org> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Brian C Burke wrote: > >For what its worth, I have SANE 1.0.1 working without problems with > >R5 and kernel 2.2.10 which I compiled with the sg drivers. The > >machine is a rev1 G3 233 with a UMAX 610s on the internal scsi bus. Great! I got a few questions for you! Where did you take your kernel sources (vger, pmac, kernel.org)? Did you take the stock sg drivers, or you compiled them from http://www.torque.net/sg/? Which scsi bus your scanner is using ( 53C94, mesh, Adaptec XXXX)? By 'internal', you mean built-in? How many devices do you have on your scsi bus? Thanks, Simon [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]