From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <37C15204.47BADD90@jeol.com> Date: Mon, 23 Aug 1999 09:52:14 -0400 From: Mike Lambert MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Re: BootX enhancement request References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: brad allison wrote: > > I'm not sure how hard/not hard this would be to do, but right now in order > to change resolutions I have to boot into MacOS, set my resolution, launch > BootX, boot into init 3, run Xautoconfig, boot into init 5. One way would be to add a line to your rc.local file to check for and run Xautoconfig automatically on startup. > It would be nice if you could set the resolution and color from BootX on > boot up. This would require using a video hw specific driver such as "atyfb" or "aty128fb". -mike [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]