From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <37CD8E2C.60E670CF@airways.com> Date: Wed, 01 Sep 1999 13:35:56 -0700 From: "D. Lance Robinson" Reply-To: lancer@airways.com MIME-Version: 1.0 To: Geert Uytterhoeven CC: Linux/PPC Development Subject: Re: Sym53c8xx in 2.3.now References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Geert, You should post your message on the linux-scsi list server. Gerard, who wrote the driver listens in on that list. send to linux-scsi@vger.rutgers.edu <>< Lance. Geert Uytterhoeven wrote: > > Anybody who has the sym53c8xx or ncr53c8xx driver working with the latest 2.3.x kernels? > > I get: > > | sym53c8xx: at PCI bus 0, device 6, function 0 > | sym53c8xx: setting PCI_COMMAND_IO PCI_COMMAND_MEMORY... > | sym53c8xx: setting PCI_COMMAND_MASTER PCI_COMMAND_PARITY...(fix-up) > | sym53c8xx: 53c875 detected > | sym53c875-0: rev=0x04, base=0xc3000000, io_port=0x1400, irq=31 > | sym53c875-0: NCR clock is 40218KHz, 40218KHz > | sym53c875-0: ID 7, Fast-20, Parity Checking > | sym53c875-0: on-chip RAM at 0xc3001000 > | sym53c875-0: restart (scsi reset). > | sym53c875-0: Downloading SCSI SCRIPTS. > | ncr53c8xx: at PCI bus 0, device 6, function 0 > | ncr53c8xx: IO region 0x1400 to 0x147f is in use > | mesh: assuming 50MHz clock frequency > | scsi0 : sym53c8xx - version 1.3c > | scsi1 : MESH > | scsi : 2 hosts. > | scsi : aborting command due to timeout : pid 0, scsi0, channel 0, id 0, lun 0 Test Unit Ready 00 00 00 00 00 > | sym53c8xx_abort: pid=0 serial_number=1 serial_number_at_timeout=1 > > And then the system hangs in a wait loop... > > My devices (from 2.3.6 dmesg): > > | Vendor: QUANTUM Model: VIKING II 4.5WLS Rev: 3506 > | Type: Direct-Access ANSI SCSI revision: 02 > | Detected scsi disk sda at scsi0, channel 0, id 0, lun 0 > | Vendor: PLEXTOR Model: CD-ROM PX-12TS Rev: 1.02 > | Type: CD-ROM ANSI SCSI revision: 02 > | Vendor: HP Model: HP35480A Rev: T503 > | Type: Sequential-Access ANSI SCSI revision: 02 > | sym53c875-0-<0,0>: tagged command queue depth set to 8 > | Vendor: QUANTUM Model: FIREBALL_TM3200S Rev: 300X > | Type: Direct-Access ANSI SCSI revision: 02 > | Detected scsi disk sdb at scsi1, channel 0, id 5, lun 0 > | scsi : detected 2 SCSI disks total. > | sym53c875-0-<0,*>: FAST-20 WIDE SCSI 40.0 MB/s (50 ns, offset 16) > | SCSI device sda: hdwr sector= 512 bytes. Sectors= 8910423 [4350 MB] [4.4 GB] > | SCSI device sdb: hdwr sector= 512 bytes. Sectors= 6281856 [3067 MB] [3.1 GB] > > Disabling sym53c8xx and using ncr53c8xx instead doesn't fix the problem. > > Greetings, > > Geert > > -- > Geert Uytterhoeven Geert.Uytterhoeven@sonycom.com > Sony Suprastructure Center Europe (SUPC-E) --- Brussels --- Belgium [[ This message was sent via the linuxppc-dev mailing list. Replies are ]] [[ not forced back to the list, so be sure to Cc linuxppc-dev if your ]] [[ reply is of general interest. Please check http://lists.linuxppc.org/ ]] [[ and http://www.linuxppc.org/ for useful information before posting. ]]