From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <37DD46B2.BFED562@fi.infn.it> Date: Mon, 13 Sep 1999 20:47:14 +0200 From: Simone Piccardi MIME-Version: 1.0 CC: linuxppc-dev@lists.linuxppc.org Subject: Re: A question about zImage when booting from HD References: <2B0D01F974CBD211B9150000F8085A1E036873AA@itexchsrv2.phx.mcd.mot.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: I'm using /dev/sda3 to boot, but I tried anyway to zero it to see if something change, but without success. I give a dd if=/dev/zero of=/dev/sda3 count=100 and then I copied again zImage in the partition, but the result was the same of before. Before erasing all my system I would like to be sure that if I use /dev/sda1 it will work. My board is a MVME2432 with a MPC101 PCI mezzanine card. Thanks -- Simone Piccardi Microsoft is NOT the answer. Microsoft is the Question. The answer is: "NO!" ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/