* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-12 21:27 Problem with glibc-2.1.3-0a.src.rpm ? Michael Fenske
@ 1999-10-12 21:06 ` Andreas Tobler
1999-10-12 23:05 ` Michael Fenske
1999-10-12 22:53 ` Franz Sirl
1 sibling, 1 reply; 9+ messages in thread
From: Andreas Tobler @ 1999-10-12 21:06 UTC (permalink / raw)
To: michael.fenske; +Cc: linuxppc-dev
Michael Fenske wrote:
>
> Hi,
>
> can anyone explain me the following output ?
>
> + ../configure --prefix=/usr --enable-add-ons=yes --without-cvs ppc-redhat-linux
> creating cache ./config.cache
> checking host system type... powerpc-redhat-linux-gnu
> checking sysdep dirs... sysdeps/powerpc/elf crypt/sysdeps/unix
> linuxthreads/sysdeps/unix/sysv/linux linuxthreads/sysdeps/pthread
> linuxthreads/sysdeps/unix/sysv
> linuxthreads/sysdeps/unix linuxthreads/sysdeps/powerpc
> sysdeps/unix/sysv/linux/powerpc sysdeps/unix/sysv/linux sysdeps/gnu
> sysdeps/unix/common sysdeps/unix/mman sysdeps/unix/inet
> sysdeps/unix/sysv sysdeps/unix sysdeps/posix sysdeps/powerpc
> sysdeps/wordsize-32 sysdeps/ieee754 sysdeps/libm-ieee754
> sysdeps/generic/elf sysdeps/generic
> checking for a BSD compatible install... /usr/bin/install -c
> checking whether ln -s works... yes
> checking build system type... powerpc-redhat-linux-gnu
> checking for gcc... egcs
> checking version of egcs... v. ?.??, bad
> checking for make... make
> checking version of make... 3.77, ok
> checking for msgfmt... msgfmt
> checking version of msgfmt... 0.10.35, ok
> checking for makeinfo... makeinfo
> checking version of makeinfo... 3.12, ok
> configure: error:
> *** Some critical program is missing or too old.
> *** Check the INSTALL file for required versions.
> Bad exit status from /var/tmp/rpm-tmp.55764 (%build)
>
> I get this if I do a 'rpm --rebuild glibc-2.1.3-0a.src.rpm'
>
> What I don't understand is that the configure-script insists that I have
> egcs installed, but I definitely have gcc-2.95.1 installed.
>
> Michael
Do you get the same when you do in ./SPEC rpm -ba glibc.spec?
I had no problem in doing so with gcc-2.95.1.
Good night
Andreas
--
| Andreas Tobler
| CH-8004 Zuerich
| E-Mail: toa@pop.agri.ch | a.tobler@schweiz.ch
-----------------------------------------------------------
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Problem with glibc-2.1.3-0a.src.rpm ?
@ 1999-10-12 21:27 Michael Fenske
1999-10-12 21:06 ` Andreas Tobler
1999-10-12 22:53 ` Franz Sirl
0 siblings, 2 replies; 9+ messages in thread
From: Michael Fenske @ 1999-10-12 21:27 UTC (permalink / raw)
To: linuxppc-dev
Hi,
can anyone explain me the following output ?
+ ../configure --prefix=/usr --enable-add-ons=yes --without-cvs ppc-redhat-linux
creating cache ./config.cache
checking host system type... powerpc-redhat-linux-gnu
checking sysdep dirs... sysdeps/powerpc/elf crypt/sysdeps/unix
linuxthreads/sysdeps/unix/sysv/linux linuxthreads/sysdeps/pthread
linuxthreads/sysdeps/unix/sysv
linuxthreads/sysdeps/unix linuxthreads/sysdeps/powerpc
sysdeps/unix/sysv/linux/powerpc sysdeps/unix/sysv/linux sysdeps/gnu
sysdeps/unix/common sysdeps/unix/mman sysdeps/unix/inet
sysdeps/unix/sysv sysdeps/unix sysdeps/posix sysdeps/powerpc
sysdeps/wordsize-32 sysdeps/ieee754 sysdeps/libm-ieee754
sysdeps/generic/elf sysdeps/generic
checking for a BSD compatible install... /usr/bin/install -c
checking whether ln -s works... yes
checking build system type... powerpc-redhat-linux-gnu
checking for gcc... egcs
checking version of egcs... v. ?.??, bad
checking for make... make
checking version of make... 3.77, ok
checking for msgfmt... msgfmt
checking version of msgfmt... 0.10.35, ok
checking for makeinfo... makeinfo
checking version of makeinfo... 3.12, ok
configure: error:
*** Some critical program is missing or too old.
*** Check the INSTALL file for required versions.
Bad exit status from /var/tmp/rpm-tmp.55764 (%build)
I get this if I do a 'rpm --rebuild glibc-2.1.3-0a.src.rpm'
What I don't understand is that the configure-script insists that I have
egcs installed, but I definitely have gcc-2.95.1 installed.
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-12 21:27 Problem with glibc-2.1.3-0a.src.rpm ? Michael Fenske
1999-10-12 21:06 ` Andreas Tobler
@ 1999-10-12 22:53 ` Franz Sirl
1999-10-13 1:04 ` Kevin B. Hendricks
1999-10-13 8:58 ` Michael Fenske
1 sibling, 2 replies; 9+ messages in thread
From: Franz Sirl @ 1999-10-12 22:53 UTC (permalink / raw)
To: Michael Fenske, linuxppc-dev
Am Die, 12 Okt 1999 schrieb Michael Fenske:
>Hi,
>
>can anyone explain me the following output ?
>
>+ ../configure --prefix=/usr --enable-add-ons=yes --without-cvs ppc-redhat-linux
>creating cache ./config.cache
>checking host system type... powerpc-redhat-linux-gnu
>checking sysdep dirs... sysdeps/powerpc/elf crypt/sysdeps/unix
>linuxthreads/sysdeps/unix/sysv/linux linuxthreads/sysdeps/pthread
>linuxthreads/sysdeps/unix/sysv
>linuxthreads/sysdeps/unix linuxthreads/sysdeps/powerpc
>sysdeps/unix/sysv/linux/powerpc sysdeps/unix/sysv/linux sysdeps/gnu
>sysdeps/unix/common sysdeps/unix/mman sysdeps/unix/inet
>sysdeps/unix/sysv sysdeps/unix sysdeps/posix sysdeps/powerpc
>sysdeps/wordsize-32 sysdeps/ieee754 sysdeps/libm-ieee754
>sysdeps/generic/elf sysdeps/generic
>checking for a BSD compatible install... /usr/bin/install -c
>checking whether ln -s works... yes
>checking build system type... powerpc-redhat-linux-gnu
>checking for gcc... egcs
>checking version of egcs... v. ?.??, bad
>checking for make... make
>checking version of make... 3.77, ok
>checking for msgfmt... msgfmt
>checking version of msgfmt... 0.10.35, ok
>checking for makeinfo... makeinfo
>checking version of makeinfo... 3.12, ok
>configure: error:
>*** Some critical program is missing or too old.
>*** Check the INSTALL file for required versions.
>Bad exit status from /var/tmp/rpm-tmp.55764 (%build)
>
>I get this if I do a 'rpm --rebuild glibc-2.1.3-0a.src.rpm'
>
>What I don't understand is that the configure-script insists that I have
>egcs installed, but I definitely have gcc-2.95.1 installed.
Did you install all parts of gcc-2.95.1? cpp is easily forgotten. What output
do you get from 'egcs -v' and 'gcc -v'?
Franz.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-12 21:06 ` Andreas Tobler
@ 1999-10-12 23:05 ` Michael Fenske
0 siblings, 0 replies; 9+ messages in thread
From: Michael Fenske @ 1999-10-12 23:05 UTC (permalink / raw)
To: a.tobler; +Cc: linuxppc-dev
Andreas Tobler wrote:
>
> Do you get the same when you do in ./SPEC rpm -ba glibc.spec?
Yes, exactly the same :-(
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-12 22:53 ` Franz Sirl
@ 1999-10-13 1:04 ` Kevin B. Hendricks
1999-10-13 9:26 ` Michael Fenske
1999-10-13 8:58 ` Michael Fenske
1 sibling, 1 reply; 9+ messages in thread
From: Kevin B. Hendricks @ 1999-10-13 1:04 UTC (permalink / raw)
To: Franz Sirl, Michael Fenske, linuxppc-dev
Hi,
I got the same error when I rebuilt Franz's glibc 2.1.2-7b src rpm.
Here is what I did in an attempt to fix it, and sure enough something here
worked (but I am not sure how or why? yet!).
1. goto /usr/lib/gcc-lib and search downwards and remove all of the old
egcs subdirectories hanging around (just leave the latest gcc ones from
Franz's gcc-2.95.1
2. add a symbolic link
ln -s 2.95.1 gcc-2.95.1
>From that point on, everything started working again. The damn configure
script was returning 2.95.1 but not gcc or egcs so it didn't find a match.
I hope this works for you.
Kevin
At 12:53 AM +0200 10/13/99, Franz Sirl wrote:
>Am Die, 12 Okt 1999 schrieb Michael Fenske:
>>Hi,
>>
>>can anyone explain me the following output ?
>>
>>+ ../configure --prefix=/usr --enable-add-ons=yes --without-cvs
>>ppc-redhat-linux
>>creating cache ./config.cache
>>checking host system type... powerpc-redhat-linux-gnu
>>checking sysdep dirs... sysdeps/powerpc/elf crypt/sysdeps/unix
>>linuxthreads/sysdeps/unix/sysv/linux linuxthreads/sysdeps/pthread
>>linuxthreads/sysdeps/unix/sysv
>>linuxthreads/sysdeps/unix linuxthreads/sysdeps/powerpc
>>sysdeps/unix/sysv/linux/powerpc sysdeps/unix/sysv/linux sysdeps/gnu
>>sysdeps/unix/common sysdeps/unix/mman sysdeps/unix/inet
>>sysdeps/unix/sysv sysdeps/unix sysdeps/posix sysdeps/powerpc
>>sysdeps/wordsize-32 sysdeps/ieee754 sysdeps/libm-ieee754
>>sysdeps/generic/elf sysdeps/generic
>>checking for a BSD compatible install... /usr/bin/install -c
>>checking whether ln -s works... yes
>>checking build system type... powerpc-redhat-linux-gnu
>>checking for gcc... egcs
>>checking version of egcs... v. ?.??, bad
>>checking for make... make
>>checking version of make... 3.77, ok
>>checking for msgfmt... msgfmt
>>checking version of msgfmt... 0.10.35, ok
>>checking for makeinfo... makeinfo
>>checking version of makeinfo... 3.12, ok
>>configure: error:
>>*** Some critical program is missing or too old.
>>*** Check the INSTALL file for required versions.
>>Bad exit status from /var/tmp/rpm-tmp.55764 (%build)
>>
>>I get this if I do a 'rpm --rebuild glibc-2.1.3-0a.src.rpm'
>>
>>What I don't understand is that the configure-script insists that I have
>>egcs installed, but I definitely have gcc-2.95.1 installed.
>
>Did you install all parts of gcc-2.95.1? cpp is easily forgotten. What output
>do you get from 'egcs -v' and 'gcc -v'?
>
>Franz.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-12 22:53 ` Franz Sirl
1999-10-13 1:04 ` Kevin B. Hendricks
@ 1999-10-13 8:58 ` Michael Fenske
1999-10-13 9:48 ` Franz Sirl
1 sibling, 1 reply; 9+ messages in thread
From: Michael Fenske @ 1999-10-13 8:58 UTC (permalink / raw)
To: Franz Sirl; +Cc: linuxppc-dev
Franz Sirl wrote:
>
> Did you install all parts of gcc-2.95.1? cpp is easily forgotten. What output
> do you get from 'egcs -v' and 'gcc -v'?
I have installed the following parts:
cpp-2.95.1-0a
gcc-2.95.1-0a
gcc-c++-2.95.1-0a
gcc-objc-2.95.1-0a
egcs -v returns
bash: egcs: command not found // what a surprise ;-)
gcc -v returns
Reading specs from /usr/lib/gcc-lib/ppc-redhat-linux/2.95.1/specs
gcc version 2.95.1 19990809 (prerelease)
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-13 1:04 ` Kevin B. Hendricks
@ 1999-10-13 9:26 ` Michael Fenske
0 siblings, 0 replies; 9+ messages in thread
From: Michael Fenske @ 1999-10-13 9:26 UTC (permalink / raw)
To: Kevin B. Hendricks; +Cc: Franz Sirl, linuxppc-dev
"Kevin B. Hendricks" wrote:
>
> 1. goto /usr/lib/gcc-lib and search downwards and remove all of the old
> egcs subdirectories hanging around (just leave the latest gcc ones from
> Franz's gcc-2.95.1
I removed them already.
>
> 2. add a symbolic link
> ln -s 2.95.1 gcc-2.95.1
I made this link and tried rebuilding glibc-2.1.3.0a again. But the
configure script continues to believe I have egcs installed.
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-13 8:58 ` Michael Fenske
@ 1999-10-13 9:48 ` Franz Sirl
1999-10-13 20:21 ` Michael Fenske
0 siblings, 1 reply; 9+ messages in thread
From: Franz Sirl @ 1999-10-13 9:48 UTC (permalink / raw)
To: michael.fenske; +Cc: linuxppc-dev
At 10:58 13.10.99 , Michael Fenske wrote:
>Franz Sirl wrote:
> >
> > Did you install all parts of gcc-2.95.1? cpp is easily forgotten. What
> output
> > do you get from 'egcs -v' and 'gcc -v'?
>
>I have installed the following parts:
>
> cpp-2.95.1-0a
> gcc-2.95.1-0a
> gcc-c++-2.95.1-0a
> gcc-objc-2.95.1-0a
>
>egcs -v returns
>
> bash: egcs: command not found // what a surprise ;-)
>
>gcc -v returns
>
> Reading specs from /usr/lib/gcc-lib/ppc-redhat-linux/2.95.1/specs
> gcc version 2.95.1 19990809 (prerelease)
Which rpm version are you using? In any case, try upgrading to 3.0.3
<ftp://devel.linuxppc.org/users/fsirl/R5/RPMS/ppc/> and then reinstall
gcc-2.95.1.
Franz.
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: Problem with glibc-2.1.3-0a.src.rpm ?
1999-10-13 9:48 ` Franz Sirl
@ 1999-10-13 20:21 ` Michael Fenske
0 siblings, 0 replies; 9+ messages in thread
From: Michael Fenske @ 1999-10-13 20:21 UTC (permalink / raw)
To: Franz Sirl; +Cc: linuxppc-dev
Franz Sirl wrote:
>
> Which rpm version are you using? In any case, try upgrading to 3.0.3
> <ftp://devel.linuxppc.org/users/fsirl/R5/RPMS/ppc/> and then reinstall
> gcc-2.95.1.
Ok, I did that. But it doesn't help.
Michael
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~1999-10-13 20:21 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
1999-10-12 21:27 Problem with glibc-2.1.3-0a.src.rpm ? Michael Fenske
1999-10-12 21:06 ` Andreas Tobler
1999-10-12 23:05 ` Michael Fenske
1999-10-12 22:53 ` Franz Sirl
1999-10-13 1:04 ` Kevin B. Hendricks
1999-10-13 9:26 ` Michael Fenske
1999-10-13 8:58 ` Michael Fenske
1999-10-13 9:48 ` Franz Sirl
1999-10-13 20:21 ` Michael Fenske
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).