linuxppc-dev.lists.ozlabs.org archive mirror
 help / color / mirror / Atom feed
From: Brendan Simon <bsimon@ctam.com.au>
To: linuxppc-embedded <linuxppc-embedded@lists.linuxppc.org>
Subject: LinuxPPC Embedded: root nfs boot problems.
Date: Fri, 12 Nov 1999 19:02:59 +1100	[thread overview]
Message-ID: <382BC9B2.FDF9AD50@ctam.com.au> (raw)


I am trying to boot embedded-2.2.5 kernel using a nfsr root filesystem.
Here is a log of the console session.  I get a "neighbour table
overflow" error.  What does this mean ?  I have a look in the source but
can't figure out what is happening.

Thanks,
Brendan Simon.



loaded at:     FF801000 FF813BAC
relocated to:  00100000 00112BAC
board data at: 001001F8 00100214
relocated to:  00200100 0020011C
zimage at:     FF808000 FF8690B9
avail ram:     00201000 00400000

Linux/PPC load: root=/dev/nfs nfsaddrs=203.21.127.132:203.21.127.160
nfsroot=203.21.127.160:/sys/ads-root
Uncompressing Linux...done.
Now booting the kernel
Linux version 2.2.5 (root@k9) (gcc version egcs-2.91.66 19990314
(egcs-1.1.2 rel
ease)) #39 Fri Nov 12 17:49:11 EST 1999
Boot arguments: root=/dev/nfs nfsaddrs=203.21.127.132:203.21.127.160
nfsroot=203
.21.127.160:/sys/ads-root
time_init: decrementer frequency = 93750000/60
Calibrating delay loop... 24.52 BogoMIPS
Memory: 15188k available (700k kernel code, 464k data, 32k init)
[c0000000,c1000
000]
POSIX conformance testing by UNIFIX
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
Starting kswapd v 1.5
CPM UART driver version 0.02
ttyS00 at 0x0280 is a SMC
ttyS01 at 0x0100 is a SCC
ttyS02 at 0x0200 is a SCC
pty: 256 Unix98 ptys configured
RAM disk driver initialized:  16 RAM disks of 4096K size
eth0: CPM ENET Version 0.2, 00:d0:1f:11:22:33
IP-Config: Guessing netmask 255.255.255.0
neighbour table overflow
neighbour table overflow
neighbour table overflow
neighbour table overflow
portmap: server 203.21.127.160 not responding, timed out
Root-NFS: Unable to get nfsd port number from server, using default
Looking up port of RPC 100005/1 on 203.21.127.160
neighbour table overflow
neighbour table overflow
neighbour table overflow
neighbour table overflow
portmap: server 203.21.127.160 not responding, timed out
Root-NFS: Unable to get mountd port number from server, using default
neighbour table overflow
neighbour table overflow
neighbour table overflow
neighbour table overflow
mount: server 203.21.127.160 not responding, timed out
Root-NFS: Server returned error -5 while mounting /sys/ads-root
VFS: Unable to mount root fs via NFS, trying floppy.
VFS: Cannot open root device 02:00
Kernel panic: VFS: Unable to mount root fs on 02:00
Rebooting in 180 seconds..<0>Kernel panic: Kernel Mode Software FPU
Emulation
Rebooting in 180 seconds..Machine check in kernel mode.
Caused by (from msr): regs c0f4bb30 Machine check signal - probably due
to mm fa
ult


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

             reply	other threads:[~1999-11-12  8:02 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
1999-11-12  8:02 Brendan Simon [this message]
     [not found] ` <382BE502.4CFC93BD@enib.fr>
1999-11-14 23:28   ` LinuxPPC Embedded: root nfs boot problems Brendan Simon
2000-01-13  7:25     ` Ouchi Masatomo
2000-01-18  4:52       ` Question on booting FADS by NFS and /bin/sh (Re: LinuxPPC Embedded: root nfs boot problems.) Ouchi Masatomo

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=382BC9B2.FDF9AD50@ctam.com.au \
    --to=bsimon@ctam.com.au \
    --cc=linuxppc-embedded@lists.linuxppc.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).