From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3839D8FD.2D6EE79D@jlc.net> Date: Mon, 22 Nov 1999 18:59:57 -0500 From: Dan Malek MIME-Version: 1.0 To: Cort Dougan CC: Neil Blackwood , sorin@nitechinc.com, linuxppc-embedded@lists.linuxppc.org Subject: Re: IDE on MBX board References: <99111909331400.01435@splash.nitechinc.com> <000a01bf34db$79773180$6401a8c0@everyone> <383975BE.A9B2A487@jlc.net> <19991122115254.A29168@chimaera.ppc.kernel.org> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Cort Dougan wrote: > ......... One of the big problems was tracking down > the interrupt routing for IDE on the MBX. If you check to see if you're > getting any interrupts at all on the 8259 that may give you a good place to > start. > > I don't have an IDE drive for my MBX anymore but would like to have it > working again. Let me know if you want to work together on it. I have a couple of projects over the next month or so (if the hardware arrives :-) that include some kind of IDE disk interface. They are not PCI/ISA devices, rather unique hardware interfaces to the bus. I also have the 8240/Sandpoint to finish, which currently has a similar interrupt routing problem you mention above (integrated interrupt controller with external 8259). I also want the pcmcia-cs running on the 8xx, which means we have to make IDE work there (and I think it is still broken on the PowerBooks :-). It appears there are enough of us to get it working, so let's just keep in touch and post the progress. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/