From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <383C4E64.5EF3D193@jlc.net> Date: Wed, 24 Nov 1999 15:45:24 -0500 From: Dan Malek MIME-Version: 1.0 To: raphael.bossek@solutions4linux.de CC: linuxppc-dev@lists.linuxppc.org, linuxppc-embedded@lists.linuxppc.org Subject: Re: newbie: get ppc823fads working with linux 2.3.x kernel... References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: raphael.bossek@solutions4linux.de wrote: > i tried here to cross-compile the unstable linux kernel for the FADS > ppc823 evaluation board but i get ONLY errors while compiling... For > instance the serial.c source does not compile or other stuff too... I guess I didn't write this enough times in the notes....Do not, do not, configure _any_ of the serial I/O options, and many other things, like CONFIG_VT. When you select 8xx for the processor type, the proper serial I/O selections are automatically made to use the internal CPM serial ports. > Where will be CONFIG_FADS #defined ? Somewhere, someplace, someday, when I get around to making the CVS updates. It was a configuration option a very long time ago, it never worked, I couldn't test it, so I removed it. I will put it back in based upon tested patches from others...... Get Magnus Damm to send you his (F)ADS patches (which he was going to send to me :-)...... Get on the linuxppc-embedded mailing list. Search the old mail archives for FADS messages. -- Dan ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/