From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3874C8D8.835DBC64@pop.agri.ch> Date: Thu, 06 Jan 2000 17:55:00 +0100 From: Andreas Tobler Reply-To: toa@pop.agri.ch MIME-Version: 1.0 To: Linux -Dev Subject: remote debugging? Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, I try to remote debugging a kernel. Configuration as follows: pm7200 Linux <------ serial cable------> PowerBook MacOS ZTerm the physical Link is ok, when cat'ing a file to /dev/ttyS1 I get it on the ZTerm window. But when I boot with BootX I add the kernel args 'console=/dev/ttyS1' in the corresponding field. The first stage text I see on the pm7200, afterwards Tux comes up and no booting messages are seen either on the pm7200 (what I expect) nor on the ZTerm window. (what I don't expect). The serial settings are as described in the xmon.txt 38400N81 The kernel is compiled with xmon included, the one I test boots and is a 2214pre18. It's only to find out how 'remote' works. Any ideas/experiences? Thanks in advance, Andreas -- | Andreas Tobler | CH-8004 Zuerich | E-Mail: a.tobler@schweiz.ch ----------------------------------------------- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/