From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3874CE29.C4E19A44@crf.canon.fr> Date: Thu, 06 Jan 2000 18:17:29 +0100 From: Eric Valette MIME-Version: 1.0 To: Matt Porter CC: Cort Dougan , Alois Fertl , LinuxppcDev Subject: Re: Changes for IDE on PREP Hardware References: <38710186.B7930E52@talknet.de> <20000104222421.A31468@hq.fsmlabs.com> <20000105164119.C20193@cx258813-a.chnd1.az.home.com> <20000106101041.A27148@cx258813-a.chnd1.az.home.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Matt Porter wrote: > > Just to tell you that : > > > > 1) I applied the 2.2.14pre4 prepide-patch on a clean > > linux 2.2.14 tree. Effectively the ppc part is in and > > not the ide-pci.c, ide-probe.c, and sl82c105.c > > 2) BUT : after applying the missing part of the patches > > the behavior is absolutely identical!!! > > > > hdc : lost interrupt... > > > > any other hints? > > Since you have the old defective MCP750, you can either return it or apply > the 99% workaround of reprogramming the level/edge triggering on the VIA as > you've done before. The patch does work on all MCG IDE capable hardware > except the revs of the MCP750 that should no longer be used by customers. No. That is not so simple : I have also a REV D board that behaves exactly the same way. If you want I can send you my .config file and the binary. Also remember that I managed to have the same linux 2.2.10 image to run on both platforms... -- __ / ` Eric Valette /-- __ o _. Canon CRF - Communication Dept (___, / (_(_(__ Rue de la touche lambert 35517 Cesson-Sevigne Cedex FRANCE Tel: +33 (0)2 99 87 68 91 Fax: +33 (0)2 99 84 11 30 E-mail: valette@crf.canon.fr http://www.crf.canon.fr ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/