From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <387A594F.E139EFE5@pop.agri.ch> Date: Mon, 10 Jan 2000 23:12:34 +0100 From: Andreas Tobler Reply-To: toa@pop.agri.ch MIME-Version: 1.0 To: jlquinn@us.ibm.com CC: Linux -Dev Subject: Re: 2.3.39-pre2 boots References: <85256862.00703603.00@D51MTA03.pok.ibm.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: jlquinn@us.ibm.com wrote: > > Did stock 2.3.38 build for you? I still can't compile it. There is still > an error due to irq_offset in arch/ppc/kernel/open_pic.c. I also get an > error in (I think) pmac_nvram.c. Sorry, didn't write it down. > > I'm trying to configure the kernel as Powermac only, rather than > powermac/prep/chrp. Might this be my problem? No it didn't, or in other words I didn't try because I had a look to the patches and I saw there no changes relevant to open_pic done in stock 2.3.38. BUT in 2.3.39pre2 Cort, added some changes in the part of open_pic.c and pmac_nvram.c and pmac_time.c. In the latter two files the only prob was an include. In the first file he did some struct changes. The 2.3.39pre2 you can get from the kernel/testing area. Maybe they're right now further .. I don't know. My build process is like the following: make pmac_config make menu_config (switch off ram-disk in block-dev) make dep make vmlinux make modules make modules_install that's it hth, Andreas -- | Andreas Tobler | CH-8004 Zuerich | E-Mail: a.tobler@schweiz.ch ----------------------------------------------- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/