From: Dan Malek <dan@netx4.com>
To: diekema_jon <diekema@bucks.si.com>
Cc: linuxppc-embedded@lists.linuxppc.org, gdb@sourceware.cygnus.com
Subject: Re: Looking for the PPC gdb debug stubs
Date: Fri, 04 Feb 2000 19:57:00 -0500 [thread overview]
Message-ID: <389B755C.486C7F08@netx4.com> (raw)
In-Reply-To: m12Gmzf-001SweC@bucks
diekema_jon wrote:
> Our initial hardware target is the EST SBC8260 board.
If there is anyone looking for Linux/PPC for the 8260, just
contact MontaVista software.
I still have a couple of minor things to finish (cache snooping
and some fast ethernet stuff) as personal challenge to help them.
I have decided to wait until the Rev A.0 silicon for the Linux/PPC
release, as I think there are just too many patches to make it
useful with older silicon. MontaVista may decide otherwise.
I just wanted everyone to know that most of the work is done,
and if you are really, really serious about 8260 you should
contact them. If you don't already have pre-A.0 silicon
soldered on a board you intend to ship, you are not really,
really serious and should probably contact Motorola (or Embedded
Planet).
-- Dan
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
prev parent reply other threads:[~2000-02-05 0:57 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-02-04 17:58 Looking for the PPC gdb debug stubs diekema_jon
2000-02-05 0:57 ` Dan Malek [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=389B755C.486C7F08@netx4.com \
--to=dan@netx4.com \
--cc=diekema@bucks.si.com \
--cc=gdb@sourceware.cygnus.com \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).