From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <38AA15EF.34407992@huawei.com.cn> Date: Wed, 16 Feb 2000 11:13:51 +0800 From: dony MIME-Version: 1.0 To: sungyeon CC: Ruedi.Hofer@ascom.ch, linuxppc-embed Subject: Re: initrd question... References: <0FPX00FFH0XJV5@pmdf-it.hasler.ascom.ch> <38AA0E9C.619E523@huawei.com.cn> <006a01bf7829$d9390c10$5a01a8c0@blue> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: sungyeon wrote: > ----- Original Message ----- > From: "dony" > To: ; "linuxppc-embed" > > Sent: Wednesday, February 16, 2000 11:42 AM > Subject: initrd question... > > > > > Hello: > > Now I want to get my initrd running. I use the ramdisk demo > "ramdisk.image.gz" under > > arch/ppc/mbxboot and compile my zvmlinux.initrd. > > The target boots correctly at the beginning. It decompresses the > kernel and runs the kernel and > > shows the boot messages. When all is done, it begins to mount root > filesystem (on Ramdisk), and shows > > the following messages: > > RAMDISK:Compressed image found at block 0 > > VFS:Mounted root (ext2 filesystem) > > Freeing unused kernel memory:28k init > > Then nothing happen. > > If your root file system is nfs, and disable BOOTP kernel option > then nothing happen. like you. > > I'v changed root file system from NFS to RAMdisk. and disabled BOOTP. Yes, I have also done this. But the problem still exists. why? > > > > At this time it should show the shell prompt. But I don't know why it > didn't show. And I couldnot input > > any character. > > Cross-compile environment: > > [binutils-2.9.1.0.19a egcs-1.1.2 glibc-2.1(including > crypt, linuxthreads)] > > I cross-compile my kernel under the above environment. > > Any suggestions will be highly appreciated. > > Thank in advance > > dony > > > > > > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/