Loading Linux on an MBX board without EPPC-bug

Loading Linux on an MBX board without EPPC-bug

[jmauro]

I've been trying to load linux onto a MBX860 board, but the instructions
say to use EPPC-Bug, but all my board starts with is raw-bug and nothing
else.  Is this board useable for Linux, or do I/can I restore EPPC-bug
some how?  Thanks for any help you can give me.

James


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/

Problems about gdbserver...

[dony]

Hello,

     I  have a gdbserver first running on the target board (gdbserever :7777
mytest), and then powerpc-linux-gdb running on the host. When I type "target
remote 10.11.27.244:7777" (10.11.27.244 is the Ip of target board) on the host
"(gdb)" prompt, it shows the error messages:
    Remote debugging using 10.11.27.244:7777
    Couldn't establish connection to remote target
    Remote communication error:Connection reset by peer.
And at the target board side, error messages as follows:
    #./gdbserver :7777 mytest
    Process mytest created; pid=8
    pid 7:killed (signal 11)
    #
Do you know why and how can I solve it?
Thanks very much.
dony


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/