[PATCH v3] powerpc/85xx: Add P2020DS board support

[PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

The P2020 is a dual e500v2 core based SOC with:
* 3 PCIe controllers
* 2 General purpose DMA controllers
* 2 sRIO controllers
* 3 eTSECS
* USB 2.0
* SDHC
* SPI, I2C, DUART
* enhanced localbus
* and optional Security (P2020E) security w/XOR acceleration

The p2020 DS reference board is pretty similar to the existing MPC85xx
DS boards and has a ULI 1575 connected on one of the PCIe controllers.

Signed-off-by: Ted Peters <Ted.Peters@freescale.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>
---
* Fixed soc node compat to have "p2020-immr"
* Fixed up SEC node per Kim's comments

- k

 arch/powerpc/boot/dts/p2020ds.dts        |  668 ++++++++++++++++++++++++++++++
 arch/powerpc/platforms/85xx/mpc85xx_ds.c |   35 ++-
 arch/powerpc/platforms/fsl_uli1575.c     |    1 +
 arch/powerpc/sysdev/fsl_pci.c            |    2 +
 include/linux/pci_ids.h                  |    2 +
 5 files changed, 707 insertions(+), 1 deletions(-)
 create mode 100644 arch/powerpc/boot/dts/p2020ds.dts

diff --git a/arch/powerpc/boot/dts/p2020ds.dts b/arch/powerpc/boot/dts/p2020ds.dts
new file mode 100644
index 0000000..ea46f7a
--- /dev/null
+++ b/arch/powerpc/boot/dts/p2020ds.dts
@@ -0,0 +1,668 @@
+/*
+ * P2020 DS Device Tree Source
+ *
+ * Copyright 2007-2009 Freescale Semiconductor Inc.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+/ {
+	model = "fsl,P2020";
+	compatible = "fsl,P2020DS";
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		ethernet2 = &enet2;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+		pci1 = &pci1;
+		pci2 = &pci2;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,P2020@0 {
+			device_type = "cpu";
+			reg = <0x0>;
+			next-level-cache = <&L2>;
+		};
+
+		PowerPC,P2020@1 {
+			device_type = "cpu";
+			reg = <0x1>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+	};
+
+	localbus@ffe05000 {
+		#address-cells = <2>;
+		#size-cells = <1>;
+		compatible = "fsl,elbc", "simple-bus";
+		reg = <0 0xffe05000 0 0x1000>;
+		interrupts = <19 2>;
+		interrupt-parent = <&mpic>;
+
+		ranges = <0x0 0x0 0x0 0xe8000000 0x08000000
+			  0x1 0x0 0x0 0xe0000000 0x08000000
+			  0x2 0x0 0x0 0xffa00000 0x00040000
+			  0x3 0x0 0x0 0xffdf0000 0x00008000
+			  0x4 0x0 0x0 0xffa40000 0x00040000
+			  0x5 0x0 0x0 0xffa80000 0x00040000
+			  0x6 0x0 0x0 0xffac0000 0x00040000>;
+
+		nor@0,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "cfi-flash";
+			reg = <0x0 0x0 0x8000000>;
+			bank-width = <2>;
+			device-width = <1>;
+
+			ramdisk@0 {
+				reg = <0x0 0x03000000>;
+				read-only;
+			};
+
+			diagnostic@3000000 {
+				reg = <0x03000000 0x00e00000>;
+				read-only;
+			};
+
+			dink@3e00000 {
+				reg = <0x03e00000 0x00200000>;
+				read-only;
+			};
+
+			kernel@4000000 {
+				reg = <0x04000000 0x00400000>;
+				read-only;
+			};
+
+			jffs2@4400000 {
+				reg = <0x04400000 0x03b00000>;
+			};
+
+			dtb@7f00000 {
+				reg = <0x07f00000 0x00080000>;
+				read-only;
+			};
+
+			u-boot@7f80000 {
+				reg = <0x07f80000 0x00080000>;
+				read-only;
+			};
+		};
+
+		nand@2,0 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x2 0x0 0x40000>;
+
+			u-boot@0 {
+				reg = <0x0 0x02000000>;
+				read-only;
+			};
+
+			jffs2@2000000 {
+				reg = <0x02000000 0x10000000>;
+			};
+
+			ramdisk@12000000 {
+				reg = <0x12000000 0x08000000>;
+				read-only;
+			};
+
+			kernel@1a000000 {
+				reg = <0x1a000000 0x04000000>;
+			};
+
+			dtb@1e000000 {
+				reg = <0x1e000000 0x01000000>;
+				read-only;
+			};
+
+			empty@1f000000 {
+				reg = <0x1f000000 0x21000000>;
+			};
+		};
+
+		nand@4,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x4 0x0 0x40000>;
+		};
+
+		nand@5,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x5 0x0 0x40000>;
+		};
+
+		nand@6,0 {
+			compatible = "fsl,elbc-fcm-nand";
+			reg = <0x6 0x0 0x40000>;
+		};
+	};
+
+	soc@ffe00000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		device_type = "soc";
+		compatible = "fsl,p2020-immr", "simple-bus";
+		ranges = <0x0 0 0xffe00000 0x100000>;
+		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed
+		bus-frequency = <0>;		// Filled out by uboot.
+
+		memory-controller@2000 {
+			compatible = "fsl,p2020-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,p2020-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;	// 32 bytes
+			cache-size = <0x100000>; // L2, 1M
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		dma@c300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0xc300 0x4>;
+			ranges = <0x0 0xc100 0x200>;
+			cell-index = <1>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <76 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <77 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <78 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <79 2>;
+			};
+		};
+
+		dma@21300 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "fsl,eloplus-dma";
+			reg = <0x21300 0x4>;
+			ranges = <0x0 0x21100 0x200>;
+			cell-index = <0>;
+			dma-channel@0 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x0 0x80>;
+				cell-index = <0>;
+				interrupt-parent = <&mpic>;
+				interrupts = <20 2>;
+			};
+			dma-channel@80 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x80 0x80>;
+				cell-index = <1>;
+				interrupt-parent = <&mpic>;
+				interrupts = <21 2>;
+			};
+			dma-channel@100 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x100 0x80>;
+				cell-index = <2>;
+				interrupt-parent = <&mpic>;
+				interrupts = <22 2>;
+			};
+			dma-channel@180 {
+				compatible = "fsl,eloplus-dma-channel";
+				reg = <0x180 0x80>;
+				cell-index = <3>;
+				interrupt-parent = <&mpic>;
+				interrupts = <23 2>;
+			};
+		};
+
+		usb@22000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			compatible = "fsl-usb2-mph";
+			reg = <0x22000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <28 0x2>;
+			phy_type = "ulpi";
+		};
+
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi0>;
+			phy-handle = <&phy0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x1>;
+				};
+				phy2: ethernet-phy@2 {
+					interrupt-parent = <&mpic>;
+					interrupts = <3 1>;
+					reg = <0x2>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet1: ethernet@25000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x25000 0x1000>;
+			ranges = <0x0 0x25000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <35 2 36 2 40 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi1>;
+			phy-handle = <&phy1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		enet2: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <2>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			tbi-handle = <&tbi2>;
+			phy-handle = <&phy2>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi2: tbi-phy@11 {
+					reg = <0x11>;
+					device_type = "tbi-phy";
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,p2020-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		msi@41600 {
+			compatible = "fsl,mpic-msi";
+			reg = <0x41600 0x80>;
+			msi-available-ranges = <0 0x100>;
+			interrupts = <
+				0xe0 0
+				0xe1 0
+				0xe2 0
+				0xe3 0
+				0xe4 0
+				0xe5 0
+				0xe6 0
+				0xe7 0>;
+			interrupt-parent = <&mpic>;
+		};
+
+		crypto@30000 {
+			compatible = "fsl,sec3.1", "fsl,sec3.0", "fsl,sec2.4",
+				     "fsl,sec2.2", "fsl,sec2.1", "fsl,sec2.0";
+			reg = <0x30000 0x10000>;
+			interrupts = <45 2 58 2>;
+			interrupt-parent = <&mpic>;
+			fsl,num-channels = <4>;
+			fsl,channel-fifo-len = <24>;
+			fsl,exec-units-mask = <0xbfe>;
+			fsl,descriptor-types-mask = <0x3ab0ebf>;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+	pci0: pcie@ffe08000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe08000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0x80000000 0 0x80000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x8 0x1
+			0000 0x0 0x0 0x2 &mpic 0x9 0x1
+			0000 0x0 0x0 0x3 &mpic 0xa 0x1
+			0000 0x0 0x0 0x4 &mpic 0xb 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0x80000000
+				  0x2000000 0x0 0x80000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+
+	pci1: pcie@ffe09000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe09000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xa0000000 0 0xa0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <25 2>;
+		interrupt-map-mask = <0xff00 0x0 0x0 0x7>;
+		interrupt-map = <
+
+			// IDSEL 0x11 func 0 - PCI slot 1
+			0x8800 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8800 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 1 - PCI slot 1
+			0x8900 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8900 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 2 - PCI slot 1
+			0x8a00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8a00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 3 - PCI slot 1
+			0x8b00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8b00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 4 - PCI slot 1
+			0x8c00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8c00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 5 - PCI slot 1
+			0x8d00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8d00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 6 - PCI slot 1
+			0x8e00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8e00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x11 func 7 - PCI slot 1
+			0x8f00 0x0 0x0 0x1 &i8259 0x9 0x2
+			0x8f00 0x0 0x0 0x2 &i8259 0xa 0x2
+
+			// IDSEL 0x1d  Audio
+			0xe800 0x0 0x0 0x1 &i8259 0x6 0x2
+
+			// IDSEL 0x1e Legacy
+			0xf000 0x0 0x0 0x1 &i8259 0x7 0x2
+			0xf100 0x0 0x0 0x1 &i8259 0x7 0x2
+
+			// IDSEL 0x1f IDE/SATA
+			0xf800 0x0 0x0 0x1 &i8259 0xe 0x2
+			0xf900 0x0 0x0 0x1 &i8259 0x5 0x2
+			>;
+
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xa0000000
+				  0x2000000 0x0 0xa0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+			uli1575@0 {
+				reg = <0x0 0x0 0x0 0x0 0x0>;
+				#size-cells = <2>;
+				#address-cells = <3>;
+				ranges = <0x2000000 0x0 0xa0000000
+					  0x2000000 0x0 0xa0000000
+					  0x0 0x20000000
+
+					  0x1000000 0x0 0x0
+					  0x1000000 0x0 0x0
+					  0x0 0x10000>;
+				isa@1e {
+					device_type = "isa";
+					#interrupt-cells = <2>;
+					#size-cells = <1>;
+					#address-cells = <2>;
+					reg = <0xf000 0x0 0x0 0x0 0x0>;
+					ranges = <0x1 0x0 0x1000000 0x0 0x0
+						  0x1000>;
+					interrupt-parent = <&i8259>;
+
+					i8259: interrupt-controller@20 {
+						reg = <0x1 0x20 0x2
+						       0x1 0xa0 0x2
+						       0x1 0x4d0 0x2>;
+						interrupt-controller;
+						device_type = "interrupt-controller";
+						#address-cells = <0>;
+						#interrupt-cells = <2>;
+						compatible = "chrp,iic";
+						interrupts = <4 1>;
+						interrupt-parent = <&mpic>;
+					};
+
+					i8042@60 {
+						#size-cells = <0>;
+						#address-cells = <1>;
+						reg = <0x1 0x60 0x1 0x1 0x64 0x1>;
+						interrupts = <1 3 12 3>;
+						interrupt-parent =
+							<&i8259>;
+
+						keyboard@0 {
+							reg = <0x0>;
+							compatible = "pnpPNP,303";
+						};
+
+						mouse@1 {
+							reg = <0x1>;
+							compatible = "pnpPNP,f03";
+						};
+					};
+
+					rtc@70 {
+						compatible = "pnpPNP,b00";
+						reg = <0x1 0x70 0x2>;
+					};
+
+					gpio@400 {
+						reg = <0x1 0x400 0x80>;
+					};
+				};
+			};
+		};
+
+	};
+
+	pci2: pcie@ffe0a000 {
+		compatible = "fsl,mpc8548-pcie";
+		device_type = "pci";
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		reg = <0 0xffe0a000 0 0x1000>;
+		bus-range = <0 255>;
+		ranges = <0x2000000 0x0 0xc0000000 0 0xc0000000 0x0 0x20000000
+			  0x1000000 0x0 0x00000000 0 0xffc20000 0x0 0x10000>;
+		clock-frequency = <33333333>;
+		interrupt-parent = <&mpic>;
+		interrupts = <26 2>;
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+			/* IDSEL 0x0 */
+			0000 0x0 0x0 0x1 &mpic 0x0 0x1
+			0000 0x0 0x0 0x2 &mpic 0x1 0x1
+			0000 0x0 0x0 0x3 &mpic 0x2 0x1
+			0000 0x0 0x0 0x4 &mpic 0x3 0x1
+			>;
+		pcie@0 {
+			reg = <0x0 0x0 0x0 0x0 0x0>;
+			#size-cells = <2>;
+			#address-cells = <3>;
+			device_type = "pci";
+			ranges = <0x2000000 0x0 0xc0000000
+				  0x2000000 0x0 0xc0000000
+				  0x0 0x20000000
+
+				  0x1000000 0x0 0x0
+				  0x1000000 0x0 0x0
+				  0x0 0x10000>;
+		};
+	};
+};
diff --git a/arch/powerpc/platforms/85xx/mpc85xx_ds.c b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
index de66de7..25f750c 100644
--- a/arch/powerpc/platforms/85xx/mpc85xx_ds.c
+++ b/arch/powerpc/platforms/85xx/mpc85xx_ds.c
@@ -163,7 +163,8 @@ static void __init mpc85xx_ds_setup_arch(void)
 #ifdef CONFIG_PCI
 	for_each_node_by_type(np, "pci") {
 		if (of_device_is_compatible(np, "fsl,mpc8540-pci") ||
-		    of_device_is_compatible(np, "fsl,mpc8548-pcie")) {
+		    of_device_is_compatible(np, "fsl,mpc8548-pcie") ||
+		    of_device_is_compatible(np, "fsl,p2020-pcie")) {
 			struct resource rsrc;
 			of_address_to_resource(np, 0, &rsrc);
 			if ((rsrc.start & 0xfffff) == primary_phb_addr)
@@ -214,6 +215,7 @@ static int __init mpc85xxds_publish_devices(void)
 }
 machine_device_initcall(mpc8544_ds, mpc85xxds_publish_devices);
 machine_device_initcall(mpc8572_ds, mpc85xxds_publish_devices);
+machine_device_initcall(p2020_ds, mpc85xxds_publish_devices);
 
 /*
  * Called very early, device-tree isn't unflattened
@@ -232,6 +234,23 @@ static int __init mpc8572_ds_probe(void)
 	}
 }
 
+/*
+ * Called very early, device-tree isn't unflattened
+ */
+static int __init p2020_ds_probe(void)
+{
+	unsigned long root = of_get_flat_dt_root();
+
+	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
+#ifdef CONFIG_PCI
+		primary_phb_addr = 0x9000;
+#endif
+		return 1;
+	} else {
+		return 0;
+	}
+}
+
 define_machine(mpc8544_ds) {
 	.name			= "MPC8544 DS",
 	.probe			= mpc8544_ds_probe,
@@ -259,3 +278,17 @@ define_machine(mpc8572_ds) {
 	.calibrate_decr		= generic_calibrate_decr,
 	.progress		= udbg_progress,
 };
+
+define_machine(p2020_ds) {
+	.name			= "P2020 DS",
+	.probe			= p2020_ds_probe,
+	.setup_arch		= mpc85xx_ds_setup_arch,
+	.init_IRQ		= mpc85xx_ds_pic_init,
+#ifdef CONFIG_PCI
+	.pcibios_fixup_bus	= fsl_pcibios_fixup_bus,
+#endif
+	.get_irq		= mpic_get_irq,
+	.restart		= fsl_rstcr_restart,
+	.calibrate_decr		= generic_calibrate_decr,
+	.progress		= udbg_progress,
+};
diff --git a/arch/powerpc/platforms/fsl_uli1575.c b/arch/powerpc/platforms/fsl_uli1575.c
index 4b10c36..0a4a3bb 100644
--- a/arch/powerpc/platforms/fsl_uli1575.c
+++ b/arch/powerpc/platforms/fsl_uli1575.c
@@ -55,6 +55,7 @@ static inline bool is_quirk_valid(void)
 {
 	return (machine_is(mpc86xx_hpcn) || 
 		machine_is(mpc8544_ds) ||
+		machine_is(p2020_ds) ||
 		machine_is(mpc8572_ds))
 }
 
diff --git a/arch/powerpc/sysdev/fsl_pci.c b/arch/powerpc/sysdev/fsl_pci.c
index 78021d8..36db7b3 100644
--- a/arch/powerpc/sysdev/fsl_pci.c
+++ b/arch/powerpc/sysdev/fsl_pci.c
@@ -296,6 +296,8 @@ DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8536, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8641D, quirk_fsl_pcie_header);
 DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_MPC8610, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020E, quirk_fsl_pcie_header);
+DECLARE_PCI_FIXUP_HEADER(0x1957, PCI_DEVICE_ID_P2020, quirk_fsl_pcie_header);
 #endif /* CONFIG_PPC_85xx || CONFIG_PPC_86xx */
 
 #if defined(CONFIG_PPC_83xx) || defined(CONFIG_PPC_MPC512x)
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06ba90c..36a1dd0 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -2286,6 +2286,8 @@
 #define PCI_DEVICE_ID_MPC8572		0x0041
 #define PCI_DEVICE_ID_MPC8536E		0x0050
 #define PCI_DEVICE_ID_MPC8536		0x0051
+#define PCI_DEVICE_ID_P2020E		0x0070
+#define PCI_DEVICE_ID_P2020		0x0071
 #define PCI_DEVICE_ID_MPC8641		0x7010
 #define PCI_DEVICE_ID_MPC8641D		0x7011
 #define PCI_DEVICE_ID_MPC8610		0x7018
-- 
1.6.0.6

RE: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Liu Dave-R63238]

> +		L2: l2-cache-controller@20000 {
> +			compatible =3D "fsl,p2020-l2-cache-controller";
> +			reg =3D <0x20000 0x1000>;
> +			cache-line-size =3D <32>;	// 32 bytes
> +			cache-size =3D <0x100000>; // L2, 1M
> +			interrupt-parent =3D <&mpic>;
> +			interrupts =3D <16 2>;
> +		};

One nit --here should be 512KB L2 cache

> +		usb@22000 {
> +			#address-cells =3D <1>;
> +			#size-cells =3D <0>;
> +			compatible =3D "fsl-usb2-mph";
> +			reg =3D <0x22000 0x1000>;
> +			interrupt-parent =3D <&mpic>;
> +			interrupts =3D <28 0x2>;
> +			phy_type =3D "ulpi";
> +		};

It should be "fsl-usb2-dr"

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Scott Wood]

On Tue, Apr 21, 2009 at 10:31:45PM -0500, Kumar Gala wrote:
> +	localbus@ffe05000 {
> +		#address-cells = <2>;
> +		#size-cells = <1>;
> +		compatible = "fsl,elbc", "simple-bus";

If this has an elbc more recent than 1.0 (looks like it), we should
indicate that here.

> +		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove once parse code for immrbase fixed

The immrbase code was fixed a long time ago -- this can go away.

> +static int __init p2020_ds_probe(void)
> +{
> +	unsigned long root = of_get_flat_dt_root();
> +
> +	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
> +#ifdef CONFIG_PCI
> +		primary_phb_addr = 0x9000;
> +#endif
> +		return 1;
> +	} else {
> +		return 0;
> +	}
> +}

Unnecessary "else".

-Scott

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

On Apr 22, 2009, at 11:44 AM, Scott Wood wrote:

> On Tue, Apr 21, 2009 at 10:31:45PM -0500, Kumar Gala wrote:
>> +	localbus@ffe05000 {
>> +		#address-cells = <2>;
>> +		#size-cells = <1>;
>> +		compatible = "fsl,elbc", "simple-bus";
>
> If this has an elbc more recent than 1.0 (looks like it), we should
> indicate that here.

that might be the case, but I leave it to u-boot to do that.

>> +		reg = <0 0xffe00000 0 0x1000>;	// CCSRBAR & soc regs, remove  
>> once parse code for immrbase fixed
>
> The immrbase code was fixed a long time ago -- this can go away.

will remove

>> +static int __init p2020_ds_probe(void)
>> +{
>> +	unsigned long root = of_get_flat_dt_root();
>> +
>> +	if (of_flat_dt_is_compatible(root, "fsl,P2020DS")) {
>> +#ifdef CONFIG_PCI
>> +		primary_phb_addr = 0x9000;
>> +#endif
>> +		return 1;
>> +	} else {
>> +		return 0;
>> +	}
>> +}
>
> Unnecessary "else".

will fix this and the 2 other cases it shows up on.

- k

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Scott Wood]

Kumar Gala wrote:
>> If this has an elbc more recent than 1.0 (looks like it), we should
>> indicate that here.
> 
> that might be the case, but I leave it to u-boot to do that.

Why?  There's no p2020 with an older eLBC, and there's no block version 
register.

-Scott

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

On Apr 22, 2009, at 12:04 PM, Scott Wood wrote:

> Kumar Gala wrote:
>>> If this has an elbc more recent than 1.0 (looks like it), we should
>>> indicate that here.
>> that might be the case, but I leave it to u-boot to do that.
>
> Why?  There's no p2020 with an older eLBC, and there's no block  
> version register.

But there might be a p2020 w/a newer eLBC version in the future.

- k

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Scott Wood]

Kumar Gala wrote:
> 
> On Apr 22, 2009, at 12:04 PM, Scott Wood wrote:
> 
>> Kumar Gala wrote:
>>>> If this has an elbc more recent than 1.0 (looks like it), we should
>>>> indicate that here.
>>> that might be the case, but I leave it to u-boot to do that.
>>
>> Why?  There's no p2020 with an older eLBC, and there's no block 
>> version register.
> 
> But there might be a p2020 w/a newer eLBC version in the future.

At which point we can add something to u-boot -- but magic SVR tables 
seem a step backward from the dts except where needed to avoid the 
creation of extra dts files.

-Scott

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

On Apr 22, 2009, at 12:16 PM, Scott Wood wrote:

> Kumar Gala wrote:
>> On Apr 22, 2009, at 12:04 PM, Scott Wood wrote:
>>> Kumar Gala wrote:
>>>>> If this has an elbc more recent than 1.0 (looks like it), we  
>>>>> should
>>>>> indicate that here.
>>>> that might be the case, but I leave it to u-boot to do that.
>>>
>>> Why?  There's no p2020 with an older eLBC, and there's no block  
>>> version register.
>> But there might be a p2020 w/a newer eLBC version in the future.
>
> At which point we can add something to u-boot -- but magic SVR  
> tables seem a step backward from the dts except where needed to  
> avoid the creation of extra dts files.

I don't see the value of complicating u-boot to have to parse and  
"fixup" the compatible instead of just having to prepend to it.   
Especially since I don't believe there is anything specific we care  
about in the 1.2 version of elbc at this point.

- k

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Scott Wood]

Kumar Gala wrote:
> 
> On Apr 22, 2009, at 12:16 PM, Scott Wood wrote:
> 
>> Kumar Gala wrote:
>>> On Apr 22, 2009, at 12:04 PM, Scott Wood wrote:
>>>> Kumar Gala wrote:
>>>>>> If this has an elbc more recent than 1.0 (looks like it), we should
>>>>>> indicate that here.
>>>>> that might be the case, but I leave it to u-boot to do that.
>>>>
>>>> Why?  There's no p2020 with an older eLBC, and there's no block 
>>>> version register.
>>> But there might be a p2020 w/a newer eLBC version in the future.
>>
>> At which point we can add something to u-boot -- but magic SVR tables 
>> seem a step backward from the dts except where needed to avoid the 
>> creation of extra dts files.
> 
> I don't see the value of complicating u-boot

But complicating u-boot is just what you're suggesting.  Put it in the 
dts, and u-boot has *zero* code to deal with this unless we find 
ourselves wanting to share the dts with another board rev with a newer 
chip with a newer elbc.

> to have to parse and 
> "fixup" the compatible instead of just having to prepend to it.  
> Especially since I don't believe there is anything specific we care 
> about in the 1.2 version of elbc at this point.

If the new elbc is compatible with the current one, then you will still 
just be prepending.  If it is not, then it very likely isn't compatible 
with 1.0 either, so you'll have to remove fsl,elbc anyway.

What "we care about" at this point is irrelevant, given the PITA it 
would be to change the device trees (or u-boot) that are already in use 
once we do begin to care.

-Scott

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

On Apr 22, 2009, at 12:38 PM, Scott Wood wrote:

> Kumar Gala wrote:
>> On Apr 22, 2009, at 12:16 PM, Scott Wood wrote:
>>> Kumar Gala wrote:
>>>> On Apr 22, 2009, at 12:04 PM, Scott Wood wrote:
>>>>> Kumar Gala wrote:
>>>>>>> If this has an elbc more recent than 1.0 (looks like it), we  
>>>>>>> should
>>>>>>> indicate that here.
>>>>>> that might be the case, but I leave it to u-boot to do that.
>>>>>
>>>>> Why?  There's no p2020 with an older eLBC, and there's no block  
>>>>> version register.
>>>> But there might be a p2020 w/a newer eLBC version in the future.
>>>
>>> At which point we can add something to u-boot -- but magic SVR  
>>> tables seem a step backward from the dts except where needed to  
>>> avoid the creation of extra dts files.
>> I don't see the value of complicating u-boot
>
> But complicating u-boot is just what you're suggesting.  Put it in  
> the dts, and u-boot has *zero* code to deal with this unless we find  
> ourselves wanting to share the dts with another board rev with a  
> newer chip with a newer elbc.
>
>> to have to parse and "fixup" the compatible instead of just having  
>> to prepend to it.  Especially since I don't believe there is  
>> anything specific we care about in the 1.2 version of elbc at this  
>> point.
>
> If the new elbc is compatible with the current one, then you will  
> still just be prepending.  If it is not, then it very likely isn't  
> compatible with 1.0 either, so you'll have to remove fsl,elbc anyway.
>
> What "we care about" at this point is irrelevant, given the PITA it  
> would be to change the device trees (or u-boot) that are already in  
> use once we do begin to care.

Which is exactly why I didn't put it in the .dts right now.  Today we  
know NO code exists that cares about "fsl,elbc-1.2". Once someone adds  
such code they can also update the .dts to match it.

- k

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Scott Wood]

Kumar Gala wrote:
>> What "we care about" at this point is irrelevant, given the PITA it 
>> would be to change the device trees (or u-boot) that are already in 
>> use once we do begin to care.
> 
> Which is exactly why I didn't put it in the .dts right now.

???

> Today we know NO code exists that cares about "fsl,elbc-1.2". Once someone adds 
> such code they can also update the .dts to match it.

DTS files and firmware are *MUCH* harder to update once they're out 
there than the kernel.  Why such opposition to using an appropriate 
compatible?

Is there anything in the p2020ds u-boot patches to set the elbc version, 
or was that just a brush-off?

-Scott

Re: [PATCH v3] powerpc/85xx: Add P2020DS board support

[Kumar Gala]

On Apr 22, 2009, at 1:16 PM, Scott Wood wrote:

> Kumar Gala wrote:
>>> What "we care about" at this point is irrelevant, given the PITA  
>>> it would be to change the device trees (or u-boot) that are  
>>> already in use once we do begin to care.
>> Which is exactly why I didn't put it in the .dts right now.
>
> ???
>
>> Today we know NO code exists that cares about "fsl,elbc-1.2". Once  
>> someone adds such code they can also update the .dts to match it.
>
> DTS files and firmware are *MUCH* harder to update once they're out  
> there than the kernel.  Why such opposition to using an appropriate  
> compatible?

Because I want to avoid make the decision right now.  We are on rev1.x  
silicon and I want to avoid greatly having to spawn a new .dts just  
for "fsl,elbc-1.2.1" that has some errata fix in it.  If dtc was  
smarter and I had less duplication between the 40-50 .dts we have for  
our various parts I wouldn't care that match.

> Is there anything in the p2020ds u-boot patches to set the elbc  
> version, or was that just a brush-off?

I was hoping that Poonam would look at doing that, but there isn't  
anything right now.

I can put out some code for u-boot to address the specific elbc issue  
if that will resolve this.

- k