From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <38BD140B.A82C085B@vas-gmbh.de> Date: Wed, 01 Mar 2000 13:58:51 +0100 From: Frank Przybylski MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: Re: PCMCIA-IDE for mpc8xx-linux-2.2.13 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, I'm trying to connect an IDE disk to the mpc860, on a TQM-860L Module running linux-2.2.13. According to Dan Malek it should be possible to use the PCMCIA port as a simple IDE interface (as stated also in m8xx_setup.c). When I try to compile the kernel with IDE/ATA-2 disk support, I get 'm8xx_setup.c: In function `m8xx_ide_init_hwif_ports':' 'm8xx_setup.c:418: `PCMCIA_MEM_ADDR' undeclared (first use in this function)'. So I guess I need some patches for port access and irq mapping, mentioned by Dan. Is it possible to make these patches available on the net? tia Frank -- =============================================================================== Frank Przybylski,VAS GmbH,Gotenstr.6,20097 Hamburg,GERMANY,TEL:+49 40 238568-14 mailto:Frank.Przybylski@vas-gmbh.de , visit us at http://www.vas-gmbh.de =============================================================================== ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/