* Some small progress on PowerBook 2000 (Pismo - 102)
@ 2000-03-03 6:31 Henry Worth
2000-03-03 8:47 ` Henry Worth
0 siblings, 1 reply; 2+ messages in thread
From: Henry Worth @ 2000-03-03 6:31 UTC (permalink / raw)
To: linuxppc-dev
I've been able to get the LinuxPPC 2000 lite image to boot to a ramdisk
shell on
a PowerBook 2000. Used a USB keyboard and Bootx 1.2b3 with the 'redhat'
bootparm
to boot to the text-based installer. When the first installer window
appears it
does take input and a ^z goes to the ramdisk shell (continuing the
install fails
when trying to mount the CDROM).
One other factor that I need to confirm really makes a difference, is
that after
seeing kmsgs about unsupported frame buffer, I set the LCD depth down to
256 colors.
I need to retry and see if this really matters.
I have been able to mount an HFS partition to /mnt, just had to wait for
a
screenful of "hda: lost interrupt messages" to go by. I'm currently
attempting to
write the kmsgs to that partition (any secrets I need to know?). I'll
post it
if a file actually gets written, otherwise I'm willing to manually
transcribe and post interesting kmsg and /proc entries, let me know what
may be usefull. This weekend
I'll look into activating the eth0 interface to dump data.
Are there any bootparms that would be useful for reconfiguring the ide
i/f
to polled I/O or perhaps persuading the kernel to use the ADB keyboard
(it is
recognized in the boot messages)? Any alternate ram-disk images that may
be
more usefull for debugging?
BTW, booting from the LinuxPPC 2000 Lite cd image (Mar. 1 version) fails
with
a can't find yaboot.conf message.
Henry
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Some small progress on PowerBook 2000 (Pismo - 102)
2000-03-03 6:31 Some small progress on PowerBook 2000 (Pismo - 102) Henry Worth
@ 2000-03-03 8:47 ` Henry Worth
0 siblings, 0 replies; 2+ messages in thread
From: Henry Worth @ 2000-03-03 8:47 UTC (permalink / raw)
To: linuxppc-dev
Attached is the kmsg dump. The system is a PowerBook 2000, 500Mhz, 256MB,
with DVD-ROM loaded with LinuxPPC 2000 Lite (3/1 version), and a QTronix
Scorpius USB keyboard attached to USB port 1 (USB 1 -- USB 0 is labeled
port 2). Kernel is 2.2.15pre3 loaded with BootX 1.2b3 with the installer
ramdisk image. Below are extracts of a system profiler report. Note the
kernel probes the DVD-ROM as a floppy, the empty USB probe strings, the
ADB keyboard and mouse are probed but don't function (even when no USB
keyboard attached), and the hda lost interrupts.
Also, the ^z break out to the shell also works in 24 bit color, it's
just not 100% reliable in either mode, usually works, but not always.
Henry
------------------
Memory overview
Disk cache: 7.96 MB
Virtual memory: 257 MB
Used on volume: MacOS HFS+
Built-in memory: 256 MB
PC100-322S
Location Size Memory type
SODIMM0/J2 128 MB SDRAM
SODIMM1/J1 128 MB SDRAM
Video memory: 8 MB Built-in display in use
Backside L2 cache: 1 MB
Hardware overview
Machine ID: 406
Model name: PowerBook
Keyboard type: PowerBook Keyboard with Inverted-T
Processor info: PowerPC G3
Machine speed: 500 MHz
Nanokernel version: 2.13
Nanokernel pool extends: 10
Nanokernel scheduled CPUs:1
Network overview
Ethernet built-in Link: down Speed: n/a Duplex: n/a
Modem
Name: PowerBook Internal 56K
Protocol: V.90
Version: V2.200-V90
Status: Information gathered.
...
Devices and Volumes
USB 0 1.4 No devices found on this bus
USB 1 1.4
Hub (QTRONIX KBD HUB )
Product ID: -28141 ($9213)
Vendor: Alcor Micro, Inc. (ALCOR)
Driver version: 1.4
Driver name: USBHub0Apple
Power (mA): 500 ($1f4)
Release number: 1.0.1
Serial number:
Keyboard (QTRONIX KBD HUB )
Product ID: 8212 ($2014)
Vendor: Qtronix Corp (ALCOR)
Driver version: 1.4
Driver name: USBHIDKeyboardModule1.4
Power (mA): 200 ($c8)
Release number: 1.0.1
Serial number: 1234
Firewire 2.3
Expansion Bay 0
ID = 0
DVD-ROM drive
Driver version: 1.3.4
Mac OS partitions: 1
Removable media: Yes
Vendor: MATSHITA
Revision number: C113
Product ID: DVD-ROM SR-8174
Serial number: Not available
LinuxPPC 2000 Install
Volume format: Mac OS Standard (HFS)
Capacity: 172.70 MB
Available: 0 bytes
Percent full: 100
Write protected: Yes
Is being file shared: No
Internal ATA 2
ID = 0
Hard drive
Driver version: Not available
Mac OS partitions: 0
Removable media: No
Vendor:
Revision number:
Product ID: Not available
Serial number: Not available
Size: 0 bytes (1K = 1000)
Capacity: 0 bytes (1K = 1024)
No volumes mounted
PCI
Slot $BD
Display card (Display)
Card type: RageM3p-parent
Card name: ATY,RageM3pParent
Card model: ATY,RageM3
Card ROM #: 113-XXXXX-111
Card revision: 2
Card vendor ID: 1002
Display
Screen Size (pixels): 1024 x 768
Grays/Colors: 256
Resolution (dpi): 72 x 72
Additional Information: Main screen
Slot PC Card
PCI Slot
Card type: cardbus
Card name: cardbus
Card model: TXN,PCI1211-00
Card ROM #: Not available
Card revision: 0
Card vendor ID: 104C
------------------------------------
<6>device tree used 3050664 bytes
<4>Total memory = 256MB; using 1024kB for hash table (at c0600000)
<4>Linux version 2.2.15pre3 (benh@sawtooth.wanadoo.fr) (gcc version 2.95.2 19991024 (release/franzo)) #3 Sat Jan 29 18:02:45 CET 2000
<6>PCI bus 0 controlled by pci at f0000000
<6>PCI buses 0..1 controlled by pci at f2000000
<6>PCI bus 0 controlled by pci at f4000000
<6>Registered 1 feature controller(s)
<6>PMU driver initialized for Core99 (iBook/iMac/G4)
<4>PowerMac using OpenPIC irq controller
<4>OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at 80040000
<6>via_calibrate_decr: decrementer_count = 249666 (1497996 ticks)
<4>ide_setup: hda=noautotune
<4>Console: colour dummy device 80x25
<4>Calibrating delay loop... 996.15 BogoMIPS
<4>Memory: 252836k available (1460k kernel code, 4792k data, 152k init) [c0000000,d0000000]
<4>Dentry hash table entries: 32768 (order 6, 256k)
<4>Buffer cache hash table entries: 262144 (order 8, 1024k)
<4>Page cache hash table entries: 65536 (order 6, 256k)
<4>POSIX conformance testing by UNIFIX
<4>PCI: Probing PCI hardware
<7>adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f
<6>media bay 0 contains a floppy disk drive
<6>Registered 1 media-bay(s)
<6>Linux NET4.0 for Linux 2.2
<6>Based upon Swansea University Computer Society NET3.039
<6>NET4: Unix domain sockets 1.0 for Linux NET4.0.
<6>NET4: Linux TCP/IP 1.0 for NET4.0
<6>IP Protocols: ICMP, UDP, TCP, IGMP
<4>TCP: Hash tables configured (ehash 262144 bhash 65536)
<6>NET4: AppleTalk 0.18 for Linux NET4.0
<4>Starting kswapd v 1.5
<6>OHCI USB Driver loading
<7>usb-ohci: 2 root hub ports found
<7>usb-ohci: 2 root hub ports found
<4>usbcore: Registered new driver mouse
<6>USB HID boot protocol mouse driver registered.
<4>usbcore: Registered new driver keyboard
<4>usbcore: Registered new driver hub
<6>Using unsupported 1024x768 MacOS display at a6008000, depth=8, pitch=1024
<4>Console: switching to colour frame buffer device 128x48
<4>fb0: Open Firmware frame buffer device on MacOS display
<4>ADB keyboard at 2, handler 1
<4>ADB mouse at 3, handler set to 4 (trackpad)
<4>PowerMac Z8530 serial driver version 2.0
<4>tty00 at 0x80013020 (irq = 22) is a Z8530 ESCC (cobalt modem)
<4>tty01 at 0x80013000 (irq = 23) is a Z8530 ESCC (powerbook IR)
<4>pty: 256 Unix98 ptys configured
<6>Macintosh ADB mouse driver installed.
<6>Macintosh non-volatile memory driver v1.0
<4>RAM disk driver initialized: 16 RAM disks of 8192K size
<6>loop: registered device at major 7
<4>pmac_ide: enabling IDE bus ID 2
<4>pmac_ide: enabling IDE bus ID 1
<4>hda: TOSHIBA MK1214GAP, ATA DISK drive
<4>ide0 at 0x8e01f000-0x8e01f007,0x8e01f160 on irq 19
<6>hda: TOSHIBA MK1214GAP, 11513MB w/0kB Cache, CHS=23392/16/63
<4>scsi : 0 hosts.
<4>scsi : detected total.
<6>PPP: version 2.3.7 (demand dialling)
<6>TCP compression code copyright 1989 Regents of the University of California
<6>PPP line discipline registered.
<6>eth0: GMAC at 00:30:65:4c:a8:58
<4>Partition check:
<4> hda:<7>ohci-control thread code for 0xc05b80e0 code at 0xc0167d18
<4>New USB bus registered, assigned bus number 1
<7>ohci-control thread code for 0xc05b8020 code at 0xc0167d18
<4>New USB bus registered, assigned bus number 2
<7>usb-ohci: HC c05b80e0 reset.
<7>usb-ohci: HC c05b8020 reset.
<6>usb-ohci: host controller operational
<6>usb-ohci: host controller operational
<7>ohci-control thread sleeping
<6>USB new device connect, assigned device number 1
<6>Manufacturer:
<6>Product:
<6>SerialNumber:
<6>USB hub found
<6>hub: 3 ports detected
<6>hub: ganged power switching
<6>hub: standalone hub
<6>hub: global over-current protection
<6>hub: power on to power good time: 44ms
<6>hub: hub controller current requirement: 100mA
<6>hub: port 1 is not removable
<6>hub: port 2 is removable
<6>hub: port 3 is removable
<6>hub: local power source is good
<6>hub: no over-current condition exists
<6>hub: enabling power on all ports
<7>usb: usb-bandwidth-alloc: was: 0, new: 11, bustime = 11 us, Pipe allowed: yes
<7>usb: bw_alloc bumped to 11 for 1 requesters
<7>usbcore: hub driver claimed interface c09a9c60
<7>ohci-control thread sleeping
<6>hub: port 1 connection change
<6>USB new device connect, assigned device number 2
<6>usb: skipped 1 class/vendor specific interface descriptors
<6>Manufacturer:
<6>Product:
<6>SerialNumber:
<6>USB HID boot protocol keyboard detected.
<7>usb: usb-bandwidth-alloc: was: 11, new: 28, bustime = 17 us, Pipe allowed: yes
<7>usb: bw_alloc bumped to 28 for 2 requesters
<7>usbcore: keyboard driver claimed interface c09a9d60
<6>hub: port 1 reset change
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4>hda: lost interrupt
<4> hda1hda: lost interrupt
<4>hda: lost interrupt
<4> hda2 hda3hda: lost interrupt
<4>hda: lost interrupt
<4> hda4 hda5hda: lost interrupt
<4>hda: lost interrupt
<4> hda6 hda7hda: lost interrupt
<4>hda: lost interrupt
<4> hda8 hda9hda: lost interrupt
<4>hda: lost interrupt
<4> hda10 hda11hda: lost interrupt
<4>hda: lost interrupt
<4> hda12 hda13hda: lost interrupt
<4>hda: lost interrupt
<4> hda14 hda15hda: lost interrupt
<4>hda: lost interrupt
<4> hda16 hda17
<5>RAMDISK: Compressed image found at block 0
<4>EXT2-fs warning: maximal mount count reached, running e2fsck is recommended
<4>VFS: Mounted root (ext2 filesystem).
<4>Freeing unused kernel memory: 152k init 32k prep
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2000-03-03 8:47 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-03-03 6:31 Some small progress on PowerBook 2000 (Pismo - 102) Henry Worth
2000-03-03 8:47 ` Henry Worth
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).