From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <38BF7C0A.332BF7F9@ncal.verio.com> Date: Fri, 03 Mar 2000 00:47:06 -0800 From: Henry Worth MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Re: Some small progress on PowerBook 2000 (Pismo - 102) References: <38BF5C2A.9A6FCADD@ncal.verio.com> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Attached is the kmsg dump. The system is a PowerBook 2000, 500Mhz, 256MB, with DVD-ROM loaded with LinuxPPC 2000 Lite (3/1 version), and a QTronix Scorpius USB keyboard attached to USB port 1 (USB 1 -- USB 0 is labeled port 2). Kernel is 2.2.15pre3 loaded with BootX 1.2b3 with the installer ramdisk image. Below are extracts of a system profiler report. Note the kernel probes the DVD-ROM as a floppy, the empty USB probe strings, the ADB keyboard and mouse are probed but don't function (even when no USB keyboard attached), and the hda lost interrupts. Also, the ^z break out to the shell also works in 24 bit color, it's just not 100% reliable in either mode, usually works, but not always. Henry ------------------ Memory overview Disk cache: 7.96 MB Virtual memory: 257 MB Used on volume: MacOS HFS+ Built-in memory: 256 MB PC100-322S Location Size Memory type SODIMM0/J2 128 MB SDRAM SODIMM1/J1 128 MB SDRAM Video memory: 8 MB Built-in display in use Backside L2 cache: 1 MB Hardware overview Machine ID: 406 Model name: PowerBook Keyboard type: PowerBook Keyboard with Inverted-T Processor info: PowerPC G3 Machine speed: 500 MHz Nanokernel version: 2.13 Nanokernel pool extends: 10 Nanokernel scheduled CPUs:1 Network overview Ethernet built-in Link: down Speed: n/a Duplex: n/a Modem Name: PowerBook Internal 56K Protocol: V.90 Version: V2.200-V90 Status: Information gathered. ... Devices and Volumes USB 0 1.4 No devices found on this bus USB 1 1.4 Hub (QTRONIX KBD HUB ) Product ID: -28141 ($9213) Vendor: Alcor Micro, Inc. (ALCOR) Driver version: 1.4 Driver name: USBHub0Apple Power (mA): 500 ($1f4) Release number: 1.0.1 Serial number: Keyboard (QTRONIX KBD HUB ) Product ID: 8212 ($2014) Vendor: Qtronix Corp (ALCOR) Driver version: 1.4 Driver name: USBHIDKeyboardModule1.4 Power (mA): 200 ($c8) Release number: 1.0.1 Serial number: 1234 Firewire 2.3 Expansion Bay 0 ID = 0 DVD-ROM drive Driver version: 1.3.4 Mac OS partitions: 1 Removable media: Yes Vendor: MATSHITA Revision number: C113 Product ID: DVD-ROM SR-8174 Serial number: Not available LinuxPPC 2000 Install Volume format: Mac OS Standard (HFS) Capacity: 172.70 MB Available: 0 bytes Percent full: 100 Write protected: Yes Is being file shared: No Internal ATA 2 ID = 0 Hard drive Driver version: Not available Mac OS partitions: 0 Removable media: No Vendor: Revision number: Product ID: Not available Serial number: Not available Size: 0 bytes (1K = 1000) Capacity: 0 bytes (1K = 1024) No volumes mounted PCI Slot $BD Display card (Display) Card type: RageM3p-parent Card name: ATY,RageM3pParent Card model: ATY,RageM3 Card ROM #: 113-XXXXX-111 Card revision: 2 Card vendor ID: 1002 Display Screen Size (pixels): 1024 x 768 Grays/Colors: 256 Resolution (dpi): 72 x 72 Additional Information: Main screen Slot PC Card PCI Slot Card type: cardbus Card name: cardbus Card model: TXN,PCI1211-00 Card ROM #: Not available Card revision: 0 Card vendor ID: 104C ------------------------------------ <6>device tree used 3050664 bytes <4>Total memory = 256MB; using 1024kB for hash table (at c0600000) <4>Linux version 2.2.15pre3 (benh@sawtooth.wanadoo.fr) (gcc version 2.95.2 19991024 (release/franzo)) #3 Sat Jan 29 18:02:45 CET 2000 <6>PCI bus 0 controlled by pci at f0000000 <6>PCI buses 0..1 controlled by pci at f2000000 <6>PCI bus 0 controlled by pci at f4000000 <6>Registered 1 feature controller(s) <6>PMU driver initialized for Core99 (iBook/iMac/G4) <4>PowerMac using OpenPIC irq controller <4>OpenPIC Version 1.2 (4 CPUs and 64 IRQ sources) at 80040000 <6>via_calibrate_decr: decrementer_count = 249666 (1497996 ticks) <4>ide_setup: hda=noautotune <4>Console: colour dummy device 80x25 <4>Calibrating delay loop... 996.15 BogoMIPS <4>Memory: 252836k available (1460k kernel code, 4792k data, 152k init) [c0000000,d0000000] <4>Dentry hash table entries: 32768 (order 6, 256k) <4>Buffer cache hash table entries: 262144 (order 8, 1024k) <4>Page cache hash table entries: 65536 (order 6, 256k) <4>POSIX conformance testing by UNIFIX <4>PCI: Probing PCI hardware <7>adb devices: [2]: 2 c3 [3]: 3 1 [7]: 7 1f <6>media bay 0 contains a floppy disk drive <6>Registered 1 media-bay(s) <6>Linux NET4.0 for Linux 2.2 <6>Based upon Swansea University Computer Society NET3.039 <6>NET4: Unix domain sockets 1.0 for Linux NET4.0. <6>NET4: Linux TCP/IP 1.0 for NET4.0 <6>IP Protocols: ICMP, UDP, TCP, IGMP <4>TCP: Hash tables configured (ehash 262144 bhash 65536) <6>NET4: AppleTalk 0.18 for Linux NET4.0 <4>Starting kswapd v 1.5 <6>OHCI USB Driver loading <7>usb-ohci: 2 root hub ports found <7>usb-ohci: 2 root hub ports found <4>usbcore: Registered new driver mouse <6>USB HID boot protocol mouse driver registered. <4>usbcore: Registered new driver keyboard <4>usbcore: Registered new driver hub <6>Using unsupported 1024x768 MacOS display at a6008000, depth=8, pitch=1024 <4>Console: switching to colour frame buffer device 128x48 <4>fb0: Open Firmware frame buffer device on MacOS display <4>ADB keyboard at 2, handler 1 <4>ADB mouse at 3, handler set to 4 (trackpad) <4>PowerMac Z8530 serial driver version 2.0 <4>tty00 at 0x80013020 (irq = 22) is a Z8530 ESCC (cobalt modem) <4>tty01 at 0x80013000 (irq = 23) is a Z8530 ESCC (powerbook IR) <4>pty: 256 Unix98 ptys configured <6>Macintosh ADB mouse driver installed. <6>Macintosh non-volatile memory driver v1.0 <4>RAM disk driver initialized: 16 RAM disks of 8192K size <6>loop: registered device at major 7 <4>pmac_ide: enabling IDE bus ID 2 <4>pmac_ide: enabling IDE bus ID 1 <4>hda: TOSHIBA MK1214GAP, ATA DISK drive <4>ide0 at 0x8e01f000-0x8e01f007,0x8e01f160 on irq 19 <6>hda: TOSHIBA MK1214GAP, 11513MB w/0kB Cache, CHS=23392/16/63 <4>scsi : 0 hosts. <4>scsi : detected total. <6>PPP: version 2.3.7 (demand dialling) <6>TCP compression code copyright 1989 Regents of the University of California <6>PPP line discipline registered. <6>eth0: GMAC at 00:30:65:4c:a8:58 <4>Partition check: <4> hda:<7>ohci-control thread code for 0xc05b80e0 code at 0xc0167d18 <4>New USB bus registered, assigned bus number 1 <7>ohci-control thread code for 0xc05b8020 code at 0xc0167d18 <4>New USB bus registered, assigned bus number 2 <7>usb-ohci: HC c05b80e0 reset. <7>usb-ohci: HC c05b8020 reset. <6>usb-ohci: host controller operational <6>usb-ohci: host controller operational <7>ohci-control thread sleeping <6>USB new device connect, assigned device number 1 <6>Manufacturer: <6>Product: <6>SerialNumber: <6>USB hub found <6>hub: 3 ports detected <6>hub: ganged power switching <6>hub: standalone hub <6>hub: global over-current protection <6>hub: power on to power good time: 44ms <6>hub: hub controller current requirement: 100mA <6>hub: port 1 is not removable <6>hub: port 2 is removable <6>hub: port 3 is removable <6>hub: local power source is good <6>hub: no over-current condition exists <6>hub: enabling power on all ports <7>usb: usb-bandwidth-alloc: was: 0, new: 11, bustime = 11 us, Pipe allowed: yes <7>usb: bw_alloc bumped to 11 for 1 requesters <7>usbcore: hub driver claimed interface c09a9c60 <7>ohci-control thread sleeping <6>hub: port 1 connection change <6>USB new device connect, assigned device number 2 <6>usb: skipped 1 class/vendor specific interface descriptors <6>Manufacturer: <6>Product: <6>SerialNumber: <6>USB HID boot protocol keyboard detected. <7>usb: usb-bandwidth-alloc: was: 11, new: 28, bustime = 17 us, Pipe allowed: yes <7>usb: bw_alloc bumped to 28 for 2 requesters <7>usbcore: keyboard driver claimed interface c09a9d60 <6>hub: port 1 reset change <4>hda: lost interrupt <4>hda: lost interrupt <4>hda: lost interrupt <4>hda: lost interrupt <4>hda: lost interrupt <4>hda: lost interrupt <4>hda: lost interrupt <4> hda1hda: lost interrupt <4>hda: lost interrupt <4> hda2 hda3hda: lost interrupt <4>hda: lost interrupt <4> hda4 hda5hda: lost interrupt <4>hda: lost interrupt <4> hda6 hda7hda: lost interrupt <4>hda: lost interrupt <4> hda8 hda9hda: lost interrupt <4>hda: lost interrupt <4> hda10 hda11hda: lost interrupt <4>hda: lost interrupt <4> hda12 hda13hda: lost interrupt <4>hda: lost interrupt <4> hda14 hda15hda: lost interrupt <4>hda: lost interrupt <4> hda16 hda17 <5>RAMDISK: Compressed image found at block 0 <4>EXT2-fs warning: maximal mount count reached, running e2fsck is recommended <4>VFS: Mounted root (ext2 filesystem). <4>Freeing unused kernel memory: 152k init 32k prep ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/