* IDE disk problem with MTX 603
@ 2000-03-06 12:43 Zirong WANG
0 siblings, 0 replies; only message in thread
From: Zirong WANG @ 2000-03-06 12:43 UTC (permalink / raw)
To: linuxppc-embedded
Hi everybody,
I am trying hardly to make work my ide disk on my MTX 603 machine,
---> without success.
I have installed 2.2.10 on my MTX 603 on a SCSI disk. I compiled
the kernel with ide support enabled and reboot with PPCBug
What I get during the boot time is something like:
IDE timing: 00000909, resetting to PIO0 timing
IDE control/status register: 00ff0091
hda: Conner Peripherals 1275MB - CFS1276A, ATA DISK drive
ide0: Disabled unable to get IRQ 16.
hda: ERROR, PORTS ALREADY IN USE
By the way, when using kernel 2.2.14, the IDE disk detection seems to
go further, but the scsi disk detection enters a infinite
timeout/reset loop.
So I am stuck,
any suggestion?
Thanks
---------------------------------------------------------------------
Zirong WANG Oce Industries 1, rue Jean Lemoine 94015 Creteil France
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-03-06 12:43 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-03-06 12:43 IDE disk problem with MTX 603 Zirong WANG
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).