From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <38C3A7DE.E6E4FB40@ocegr.fr> Date: Mon, 06 Mar 2000 13:43:10 +0100 From: Zirong WANG MIME-Version: 1.0 To: linuxppc-embedded@lists.linuxppc.org Subject: IDE disk problem with MTX 603 Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi everybody, I am trying hardly to make work my ide disk on my MTX 603 machine, ---> without success. I have installed 2.2.10 on my MTX 603 on a SCSI disk. I compiled the kernel with ide support enabled and reboot with PPCBug What I get during the boot time is something like: IDE timing: 00000909, resetting to PIO0 timing IDE control/status register: 00ff0091 hda: Conner Peripherals 1275MB - CFS1276A, ATA DISK drive ide0: Disabled unable to get IRQ 16. hda: ERROR, PORTS ALREADY IN USE By the way, when using kernel 2.2.14, the IDE disk detection seems to go further, but the scsi disk detection enters a infinite timeout/reset loop. So I am stuck, any suggestion? Thanks --------------------------------------------------------------------- Zirong WANG Oce Industries 1, rue Jean Lemoine 94015 Creteil France ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/