From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <38C436C3.36BC4448@pop.agri.ch> Date: Mon, 06 Mar 2000 23:52:51 +0100 From: Andreas Tobler Reply-To: toa@pop.agri.ch MIME-Version: 1.0 To: Dev-Linux , Benjamin Herrenschmidt , Paul Mackerras Subject: Re: serial module in 2.3.x? References: <38C3BE97.3DE053C9@pop.agri.ch> <38C42E7D.B537A3F0@pop.agri.ch> Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Additional follow up, I enabled the xmon without video driver enabled: It works but, I can't see the output, only the line breaks. Means, if I type 't' for bt I get some line breaks but no screen output. This is done under 2.3.50-pre2, which is the same, more or less as 2.3.49 from bk. The behaviour of not showing me the xmon output I saw under 2.3.48 lc, bk and stock. Andreas Tobler wrote: > > Some follow up, > > I hang in the procedure autoconfig from serial.c, I get out the msg. > 'Testing ttysx'. > this happens on a wallstreet & on a pm7200. > It takes a lot of time to find out where, since each freeze needs about > 10' to reboot (fsck) > > Thanks for any hint!! > > Andreas Tobler wrote: > > > > Hi, > > has anybody seen the same? I'd like to include the serial.o module into > > recent kernels (2.3.x). No luck, I always get a machine check. I'm not > > sure where it is. > > This happens up to 2.3.50-pre2. I suppose it has to do with the > > SHARE_IRQ etc. > > Any ideas? > > Andreas -- | Andreas Tobler | CH-8004 Zuerich | E-Mail: a.tobler@schweiz.ch ----------------------------------------------- ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/