Re : does'nt work BWG3v2's ide

Re : does'nt work BWG3v2's ide

[Florent BOUDET]

I have experienced the same ide probing problem with 2.3.99-preX, too. (BW
G3 rev2)
Since I couldn't find any issues, I switched back to the stable tree.
Has anyone good ide probes with CMD646 ?

If anyone knows a solution, I am interested, too.

Florent

>From : Kaoru Fukui <k_fukui@highway.ne.jp>

> Hi!
>
> I am trying kernel-2.3.99-pre6 from paul's tree.
>
> Since a couple month ago,
>   I don't have success the kernel on the CMD646 ide HD.
> My machine is BWG3v2 which have CMD646.
> it's ide driver is fail.
> the scsi is no problem as well.
>
> I think that nomal ide is ok.
> I doesn't use DEVFS_FS.
>
> Any fix.
>
>
> Kaoru
>
> CMD646: IDE controller on PCI bus 01 dev 08
> CMD646: chipset revision 0x07, UltraDMA Capable
> CMD646: 100% native mode on irq 26
>     ide0: BM-DMA at 0x1400-0x1407, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0x1408-0x140f, BIOS settings: hdc:pio, hdd:pio
> pmac_ide: enabling IDE bus ID 0
> hda: , ATA DISK drive
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> hde: MATSHITA CR-589, ATAPI CDROM drive
> ide0 at 0x1440-0x1447,0x000 on irq 26
> ide2 at 0xcf1a9000-0xcf1a9007,0xcf1a9160 on irq 13
> hda: 0 sectors (0 MB), CHS=0/0/0, DMA
> hda: INVALID GEOMETRY: 0 PHYSICAL HEADS?
> hde: ATAPI 32X CD-ROM drive, 128kB Cache
> Uniform CD-ROM driver Revision: 3.07
> (scsi0) <Adaptec AHA-294X Ultra2 SCSI host adapter> found at PCI 1/4/0
> (scsi0) Wide Channel, SCSI ID=7, 32/255 SCBs
> (scsi0) Downloading sequencer code... 392 instructions downloaded
> scsi0 : Adaptec AHA274x/284x/294x (EISA/VLB/PCI-Fast SCSI) 5.2.0/3.2.4
>        <Adaptec AHA-294X Ultra2 SCSI host adapter>
> scsi1 : MESH
> scsi : 2 hosts.
> (scsi0:0:0:0) Synchronous at 80.0 Mbyte/sec, offset 15.
>   Vendor: IBM       Model: DDRS-39130D       Rev: DC2A
>   Type:   Direct-Access                      ANSI SCSI revision: 02
> Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
> scsi : detected 1 SCSI disk total.
> SCSI device sda: hdwr sector= 512 bytes. Sectors= 17850000 [8715 MB] [8.7 GB]
> Partition check:
>  sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9
> Macintosh ADB mouse driver installed.
>

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: Re : does'nt work BWG3v2's ide

[Robert Shaw]

[-- Attachment #1: Type: text/plain, Size: 442 bytes --]

Florent BOUDET wrote:

> Has anyone good ide probes with CMD646 ?
>

No, I get the same problems. I can only get the stable tree to run on my Rev.1 B&W
G3. I always get IDE problems with the 2.3.x series kernel. I'm glad it's not me,
but I still have no idea how to get it working right .... :P

--
-Robert
 mailto:rshaw-az@home.com
 http://members.home.net/rshaw-az/
 mailto:rshaw@linuxppc.org
 http://www.linuxppc.org/BlueG3/
 icq:45688313

[-- Attachment #2: Card for Robert Shaw --]
[-- Type: text/x-vcard, Size: 620 bytes --]

begin:vcard
n:Shaw;Robert
x-mozilla-html:TRUE
url:http://members.home.net/rshaw-az/
adr:;;;;;;U.S.A.
version:2.1
email;internet:rshaw-az@home.com
org;quoted-printable:<a href=3D"http://www.linuxppc.org/BlueG3/"><img src=3D"http://members.home.net/rshaw-az/linuxppc.jpg" border=3D1></a> &lt=3B<a href=3D"mailto:rshaw@linuxppc.org">rshaw@linuxppc.org</a>&gt=3B
title;quoted-printable:<a href=3D"http://members.home.net/rshaw-az/"><img src=3D"http://members.home.net/rshaw-az/@homenetwork.gif" border=3D1></a> &lt=3B<a href=3D"mailto:rshaw-az@home.com">rshaw-az@home.com</a>&gt=3B
x-mozilla-cpt:;1
fn:Robert Shaw
end:vcard

Re: Re : does'nt work BWG3v2's ide

[Tim Wojtulewicz]

Robert Shaw wrote:

> No, I get the same problems. I can only get the stable tree to run on my Rev.1 B&W
> G3. I always get IDE problems with the 2.3.x series kernel. I'm glad it's not me,
> but I still have no idea how to get it working right .... :P
>

Speaking of problems with IDE in the 2.3.x kernel.  I've got a problem with it too.
I compiled the current devel version, with the nvram patch in.  At boot, it
recognizes the drive, then gives this error:

partition check:
    /dev/ide/host0/bus0/target0/lun0: hda lost interrupt

Back to the lost interrupts....

I'm trying to build one of the stable kernels now.  We'll see how that goes.

Tim


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/

Re: Re : does'nt work BWG3v2's ide

[Kaoru Fukui]

From: Robert Shaw <rshaw-az@home.com>
To: Florent BOUDET <flobo@iname.com>
Subject: Re: Re : does'nt work BWG3v2's ide
Date: Fri, 21 Apr 2000 12:22:40 -0700
CC: Kaoru Fukui <k_fukui@highway.ne.jp>, linuxppc-dev@lists.linuxppc.org

> Florent BOUDET wrote:
>
> > Has anyone good ide probes with CMD646 ?
> >
>
> No, I get the same problems. I can only get the stable tree to run on my
Rev.1 B&W
> G3. I always get IDE problems with the 2.3.x series kernel. I'm glad it's
not me,
> but I still have no idea how to get it working right .... :P


thanks,reply

I tried to change cmd646 driver from stable kernel.
I could compile it, but the result was the same.

Kaoru


** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/