From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39107AB8.75A94A6E@embeddededge.com> Date: Wed, 03 May 2000 15:15:04 -0400 From: Dan Malek MIME-Version: 1.0 To: diekema_jon CC: linuxppc-embedded@lists.linuxppc.org, beatson_mark@bucks.si.com Subject: Re: Need CPM clock >= 100 Mhz for fast ethernet operation References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: diekema_jon wrote: > diff -u -r1.1 arch/ppc/mbxboot/embed_config.c > * here for those people that may load the kernel with > * a JTAG/COP tool and not the rom monitor. > */ Yeah, well, like the comment says, these are here for you to use when you don't initialize them in any other way. I'm not going to update the kernel sources because they will be different for everyone. I just stuffed some numbers for testing, change them to suit your needs. You should have a boot rom, some NVRAM or I guess we could derive these numbers from the configuration registers when we know the external clock speed. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/