From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3912F591.6F6AE305@embeddededge.com> Date: Fri, 05 May 2000 12:23:45 -0400 From: Dan Malek MIME-Version: 1.0 To: "Brown, David (dbrown03)" CC: linuxppc-embedded@lists.linuxppc.org Subject: Re: interference between scc serial and ethernet: more information References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: "Brown, David (dbrown03)" wrote: > It's a 50MHz MPC860, identified by 8xxrom as XPC860xxZPnnC1 and actually > stamped as XPC860ENCZP50C1. Running at 50MHz. There shouldn't be any trouble with that part. Since this is a custom board, what software changes have you made? What board configuration file are you using? What changes did you make to commproc.h to support your Ethernet configuration? Send me all of your changes (i.e. diff the sources), or post them or something. This kernel on something like the Embedded Planet CLLF runs just fine with Ethernet and PPP on multiple serial ports. Show the changes and maybe we can help. I certainly can't guess any more. -- Dan ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/