From: "Richard Hendricks" <richard.hendricks@motorola.com>
To: "Dan A. Dickey" <ddickey@charter.net>
Cc: "linuxppc-embedded@lists.linuxppc.org"
<linuxppc-embedded@lists.linuxppc.org>
Subject: Re: How to get rom code to go on FADS?
Date: Tue, 16 May 2000 09:50:09 -0500 [thread overview]
Message-ID: <39216021.8FF44C3E@motorola.com> (raw)
In-Reply-To: 39204117.73C9FE3B@charter.net
Dan,
By any chance, do you not have +12V applied? Also, how are you
programming your Flash ROM? Try downloading it and reading the
memory locations with MPC8bug (normally MPC8bug puts the Flash
up at 0x02800100), then power off for a minute or two, then
reset the board normally through MPC8bug and read the memory
locations again. It almost sounds like your Flash isn't getting
programmed at all...
Do an mdi at 0x02800100 to see if your code is properly getting
programmed. I've got a feeling that I might know what's going on.
"Dan A. Dickey" wrote:
>
> Ok, I've now learned that even a simple:
>
> _start:
> b _start
>
> fails with the development port interrupt.
> Really odd...
> -Dan
--
MPC823 Applications Engineering Development
Get help from other MPC823 customers on the
comp.sys.powerpc.tech newsgroup!
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
next prev parent reply other threads:[~2000-05-16 14:50 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-05-11 21:11 How to get rom code to go on FADS? Dan A. Dickey
2000-05-12 16:33 ` Richard Hendricks
2000-05-12 17:03 ` Dan A. Dickey
2000-05-12 18:57 ` Richard Hendricks
2000-05-13 13:54 ` Dan A. Dickey
2000-05-15 15:54 ` Richard Hendricks
2000-05-15 17:00 ` Dan A. Dickey
2000-05-15 17:43 ` Dan A. Dickey
2000-05-15 18:25 ` Dan A. Dickey
2000-05-16 14:50 ` Richard Hendricks [this message]
2000-05-16 21:03 ` Dan A. Dickey
2000-05-16 1:55 ` Dan A. Dickey
2000-05-16 14:45 ` Richard Hendricks
[not found] ` <3920ED16.A2D26629@snom.de>
[not found] ` <3921B844.572E3C63@charter.net>
2000-05-17 2:31 ` Dan A. Dickey
2000-05-17 19:08 ` Richard Hendricks
2000-05-18 3:20 ` Dan Malek
2000-05-18 3:22 ` Dan A. Dickey
2000-05-18 3:20 ` Dan A. Dickey
2000-05-18 16:15 ` Richard Hendricks
2000-05-19 11:12 ` Dan A. Dickey
2000-05-19 15:01 ` Richard Hendricks
2000-05-13 5:18 ` duncanp
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39216021.8FF44C3E@motorola.com \
--to=richard.hendricks@motorola.com \
--cc=ddickey@charter.net \
--cc=linuxppc-embedded@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).