From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <3922914E.9EC23A6@gmx.de>
Date: Wed, 17 May 2000 14:32:14 +0200
From: Norbert Zimmermann <zimmer_n@gmx.de>
Reply-To: zimmer_n@gmx.de
MIME-Version: 1.0
To: linuxppc-embedded@lists.linuxppc.org
Subject: Linuxppc + MPC860T + Ethernet
Content-Type: text/plain; charset=us-ascii
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Hello everybody,

has anybody experienced using the Motorola MPC860T with Linuxppc and
10BeseT / 100BaseTX in terms of drivers, accessing drivers, etc?

I am planing to use the MPC860T in the configuration mentioned above as
a programmable Ethernet Controller. For speed reasons I have to
interface the rest of the system with the MPC860T using the 32 Bit
syncronous Databus of the machine.

My key questions are (@ the mom):
- How difficult is it to get the Ethernet side of the MPC860T to work.
- Where can I get Linuxppc Ethernet-Drivers for that purpose from?
- Where can I get fully documented protocoll stacks, like UDP or TCPIP,
from?
- How do I drive the external bus of the MPC860T using Linuxpppc?

I have just started of working with this machine.. I am a complete
newbie..

Thanx a lot
N. Zimmermann


** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/