From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <392C8042.EB65AAF6@embeddededge.com>
Date: Wed, 24 May 2000 21:22:10 -0400
From: Dan Malek <dan@netx4.com>
MIME-Version: 1.0
To: Neil Russell <caret@c-side.com>
CC: Dan Malek <dan@netx4.com>, diekema_jon <diekema@bucks.si.com>,
        all@cideas.com, linuxppc-embedded@lists.linuxppc.org
Subject: Re: Floating Point problems with Linux on the EST SBC8260
References: <20000524134257.A9100@lx.c-side.com> <m12uikI-001SyaC@bucks> <20000524150506.D9100@lx.c-side.com> <392C5713.1C921311@embeddededge.com> <20000524160640.E9100@lx.c-side.com>
Content-Type: text/plain; charset=us-ascii
Sender: owner-linuxppc-embedded@lists.linuxppc.org
List-Id: <linuxppc-embedded@lists.linuxppc.org>


Neil Russell wrote:

> console = SMC1.  First ported to SBC8260 (EST board), then to custom h/w.
> The custom h/w has an IDE interface;  I hope to get the whole linux-1999 Q3
> working on it;  that should be interesting.

Oh oh.....You opened the flood gates for questions now :-).  How did
you connect the IDE?


> Sure!  It might be a few weeks though...

Send patches and tell me the baseline......


Thanks.


	-- Dan

** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/