From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3935BEE9.63593F78@wanadoo.fr> Date: Thu, 01 Jun 2000 03:39:54 +0200 From: Martin Costabel MIME-Version: 1.0 To: Geert Uytterhoeven CC: Linux/PPC Development Subject: Re: mesh in 2.4.0-test1 References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Geert Uytterhoeven wrote: > > Is there anyone who is succesfully using SCSI devices connected to MESH SCSI > with 2.4.0-test1 (or late 2.3.99-preX, e.g. pre9)? Yes. I have only the one SCSI bus, though. From dmesg: scsi0 : MESH scsi : 1 host. mesh: target 3 synchronous at 5.0 MB/s Vendor: MATSHITA Model: CD-ROM CR-8008 Rev: 8.0e Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 3, lun 0 mesh: target 4 synchronous at 5.0 MB/s Vendor: QUANTUM Model: XP34550S Rev: LXY4 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi disk sda at scsi0, channel 0, id 4, lun 0 Vendor: IOMEGA Model: ZIP 100 Rev: E.08 Type: Direct-Access ANSI SCSI revision: 02 Detected scsi removable disk sdb at scsi0, channel 0, id 5, lun 0 scsi : detected 1 SCSI cdrom 2 SCSI disks total. Uniform CD-ROM driver Revision: 3.08 SCSI device sda: hdwr sector= 512 bytes. Sectors= 8890760 [4341 MB] [4.3 GB] /dev/scsi/host0/bus0/target4/lun0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 SCSI device sdb: hdwr sector= 512 bytes. Sectors= 196608 [96 MB] [0.1 GB] sdb: Write Protect is off /dev/scsi/host0/bus0/target5/lun0: p1 p2 p3 p4 Kernel is current rsync from bitkeeper (2.4.0-test1, no ac): root[5]#cat /proc/version Linux version 2.4.0-test1 (root@chezmoi) (gcc version 2.95.3 19991030 (prerelease/franzo)) #61 Mon May 29 09:36:00 CEST 2000 The only problem I have with these devices is that I can't mount a HFS CD, but whose fault this is is unknown, probably hfs or mount. -- Martin ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/