From mboxrd@z Thu Jan  1 00:00:00 1970
Message-ID: <394A5253.658D6BEF@embeddededge.com>
Date: Fri, 16 Jun 2000 12:14:11 -0400
From: Dan Malek <dan@netx4.com>
MIME-Version: 1.0
To: Giuliano Pochini <pochini@denise.shiny.it>
CC: linuxppc-dev@lists.linuxppc.org
Subject: Re: Serial
References: <394988C9.92470C6F@denise.shiny.it>
Content-Type: text/plain; charset=us-ascii
Sender: owner-linuxppc-dev@lists.linuxppc.org
List-Id: <linuxppc-dev@lists.linuxppc.org>


Giuliano Pochini wrote:
>
> Does the "stealth" serial port for blue-G3 work with Linux ?

I use them in my old iMac, new iMac (rev. D), iMac DV, and in my G4
server.  If the blue-G3 uses the same kind of modem as any of these,
and if the Stealth folks claim it will work in the G3, I would suspect
it works fine.  There is a challenge with the iMac DV, because they
don't make a card specifically for that machine.  I used a G4 version,
removed the header pins and soldered the cable directly to the board.
Tight fit, but it works.


	-- Dan

** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/