From: Claudio Nieder <private@claudio.ch>
To: linuxppc-dev@lists.linuxppc.org
Subject: Kernel >=2.2.16 on Lombard
Date: Sat, 24 Jun 2000 22:30:03 +0200 [thread overview]
Message-ID: <39551A4B.2D488E6@claudio.ch> (raw)
Hi,
I'm not able to use either linuxBenh or linuxStable, which I
rsynced some hours ago from linuxcare, on my Lombard. I use
the .config as supplied (just calling make oldconfig before
make dep etc.). My last kernel I built was 2.2.15pre19 from
one of the above sources, and it works well.
linuxBenh, which identifies itself as version 2.2.16, will stop
early during boot with the message:
pmac nvram is core99: 0
Don't know how to access NVRAM with 0 addresses.
linuxStable, which identifies itself as version 2.2.17pre3 will stop
even earlier, after the line
booting...
was printed. If anybody was succesful in using one of the above
kernels on the Lombard I'd appreciate, if you could send me your
.config.
Thank you
claudio
--
Claudio Nieder, Kanalweg 1, CH-8610 Uster, Tel +41 79 357 6743
mailto:private@claudio.ch http://www.claudio.ch icq:42315212
** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/
next reply other threads:[~2000-06-24 20:30 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2000-06-24 20:30 Claudio Nieder [this message]
2000-06-26 16:37 ` Kernel >=2.2.16 on Lombard Claudio Nieder
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=39551A4B.2D488E6@claudio.ch \
--to=private@claudio.ch \
--cc=linuxppc-dev@lists.linuxppc.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).