From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39551A4B.2D488E6@claudio.ch> Date: Sat, 24 Jun 2000 22:30:03 +0200 From: Claudio Nieder MIME-Version: 1.0 To: linuxppc-dev@lists.linuxppc.org Subject: Kernel >=2.2.16 on Lombard Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Hi, I'm not able to use either linuxBenh or linuxStable, which I rsynced some hours ago from linuxcare, on my Lombard. I use the .config as supplied (just calling make oldconfig before make dep etc.). My last kernel I built was 2.2.15pre19 from one of the above sources, and it works well. linuxBenh, which identifies itself as version 2.2.16, will stop early during boot with the message: pmac nvram is core99: 0 Don't know how to access NVRAM with 0 addresses. linuxStable, which identifies itself as version 2.2.17pre3 will stop even earlier, after the line booting... was printed. If anybody was succesful in using one of the above kernels on the Lombard I'd appreciate, if you could send me your .config. Thank you claudio -- Claudio Nieder, Kanalweg 1, CH-8610 Uster, Tel +41 79 357 6743 mailto:private@claudio.ch http://www.claudio.ch icq:42315212 ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/