From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <395722C9.8510A7EE@student.ethz.ch> Date: Mon, 26 Jun 2000 11:30:49 +0200 From: Michel Dänzer MIME-Version: 1.0 To: Wolfgang Haeuptli CC: linuxppc-dev@lists.linuxppc.org Subject: Re: scsi-experts needed: target aborted References: <00062523582400.00479@lobo.localnet> Content-Type: text/plain; charset=iso-8859-1 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Wolfgang Haeuptli wrote: > I was never able to access my scanner (UMAX astra 1200S, scsi). > > mesh reports: target 6 aborted, interrupt in idle phase ? > > Some time ago, somebody posted a patch (see end of message) to enable > scsi-debugging, which miraculously makes the scanner get recognized by the > kernel and work (partly) with SANE... > I had to disabled the patch again, because my log file (and the console) got > filled up with tons of debug infos. > > Now my question to scsi-cracks: > Why does the device only gets registered with debugging enabled (no other > changes to mesh) I'm not a SCSI crack, but anyway :) Debugging slows down very much, so - sounds to me like the SCSI driver needs idle loops and/or memory barriers here and there... Michel -- No gates, no windows ... It's open! ______________________________________________________________________________ Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast Debian GNU/Linux (powerpc,i386) user \ member of XFree86, Team *AMIGA*, AUGS ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/