From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39579763.365AE86E@snmc.com> Date: Mon, 26 Jun 2000 12:48:19 -0500 From: Daris Nevil MIME-Version: 1.0 To: Manie Steyn CC: linuxppc-embedded@lists.linuxppc.org Subject: Re: FEC support References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Manie, The message "neighbour table overflow" is the result of some changes to the IP stack software in Linux version 2.2.x +. This simply means that you are unable to connect to your NFS server. It may be related to the driver, but it may also be related to other issues, such as NFS server not running or incorrectly installed, no physical connectivity to NFS server, etc. Check the configuration of your NFS server and IP network before diving into the driver. Daris Nevil SiSIC Inc/SNMC www.snmc.com Manie Steyn wrote: > Hi, > > I am running the Embedded Planet Classic 860T with Monta Vista's 2.2.13 > kernel and have some trouble in getting the FEC interface up and running. > > The "link" LED comes on but after using ifconfig to assign an IP, I get > "neighour table overflow" when pinging to or from the device. > > I saw the following mail from Dan regarding the 2.4 tree: > > > >>> "dan@netx4.com" 06/08/00 20:56 >>> > > > I merged a ton of changes into the FEC driver from Magnus, Graham, > > and myself for generic PHY support. Don't even think about complaining > > that this doesn't yet work. I know it doesn't. > > Does this also hold for the FEC driver in the 2.2.13 port, or am I doing > something wrong? > > Regards > Manie Steyn > ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/