From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <3960A691.4934D982@essegi.net> Date: Mon, 03 Jul 2000 16:43:30 +0200 From: Gianluca Costa MIME-Version: 1.0 To: "linuxppc-embedded@lists.linuxppc.org" Subject: PReP kernel making Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-embedded@lists.linuxppc.org List-Id: Hi, I am trying to compile the 2.2.15 kernel sources (Debian potato for the ppc) for MCPN750 borad but I am not able to understand why my zImage don't run. The output from PPCBUG is: ... PPC1-Bug>nbo Network Booting from: DEC21143, Controller 0, Device 0 Device Name: /pci@80000000/pci1011,19@e,0:0,0 Loading: zImage Client IP Address = 192.168.30.189 Server IP Address = 192.168.30.181 Gateway IP Address = 0.0.0.0 Subnet IP Address Mask = 255.255.255.0 Boot File Name = zImage Argument File Name = Network Boot File load in progress... To abort hit Bytes Received =&1021571, Bytes Loaded =&1021571 Bytes/Second =&340523, Elapsed Time=3 Second(s) Residual-Data Located at: $03F88000 (end) I am using the default config that came with the kernel, but nothing changes. What should I do to make a bootable kernel image? What kind of difference there can be between the bootable image I found on the debian distribution and the one I'm trying to build? Is there any patch or something other I should add to the plain sources? Thanks in advance Best regards, Gianluca Costa gcosta@essegi.net ** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/