* ide driver - where do i start?
@ 2000-07-06 22:15 ben bodley
0 siblings, 0 replies; only message in thread
From: ben bodley @ 2000-07-06 22:15 UTC (permalink / raw)
To: mailing list
hello all!
listen, we are using a ppc 403gcx running at 80 mips, and have connected
an ide drive straight up to the data bus (through some buffers)..
i can look at the driver command/control registers fine as memory mapped
i/o, etc.. the hd is dma-able and the interface is setup to be stable at
pio4 possibly udma/33..
the next step for me is to modify the linux ide code to talk to my
drive.. has anyone hooked up ide directly to the processor bus?? i am
currently looking at basing my code off drivers/block/ide-pmac.c and
changing the probe and dma code to fit.. is this the place to start??
cheers for any insights,
--
/\\------------------------------------------------------------------
:::::::::::..ben.b..m2technologyltd.nz..64.9.4448307.130..:::::::::::
** Sent via the linuxppc-embedded mail list. See http://lists.linuxppc.org/
^ permalink raw reply [flat|nested] only message in thread
only message in thread, other threads:[~2000-07-06 22:15 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2000-07-06 22:15 ide driver - where do i start? ben bodley
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).