From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39860A50.E423F099@embeddededge.com> Date: Mon, 31 Jul 2000 19:22:56 -0400 From: Dan Malek MIME-Version: 1.0 To: Geert Uytterhoeven CC: linuxppc-dev Subject: Re: CONFIG_PPC != Mac References: Content-Type: text/plain; charset=us-ascii Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Geert Uytterhoeven wrote: > Given the flexibility I was used to on m68k[*], I find this a pity as well... Well, it looks like I opened up a big can of worms........... I guess this is something that will get discussed as part of "restructuring" the PowerPC source tree when we jump into 2.5.xx. However, I need some kind of a simple solution that will help me with the embedded processors that will no longer build in the 2.4.xx kernel. I know there must be some embedded Linux m68k boards that have a similar challenge that I may be able to use for insight. What I would like to do in the short term, is create a CONFIG_PPCMAC that has the sole purpose of including the drivers/macintosh software, or perhaps overload the CONFIG_ALL_PPC to do this. Perhaps I will look at what CONFIG_PPC really means, and not define this for embedded boards (although this sounds wrong). Thanks for the comments. We'll be back :-). -- Dan ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/