From mboxrd@z Thu Jan 1 00:00:00 1970 Message-ID: <39907B00.45AE35FF@student.ethz.ch> Date: Tue, 08 Aug 2000 23:26:25 +0200 From: Michel Dänzer MIME-Version: 1.0 To: "Kevin B. Hendricks" , linuxppc-dev@lists.linuxppc.org Subject: Re: How to get up-to-speed on the 3D / DRI in Rage 128 References: <39902BE4.44DE97C1@ivey.uwo.ca> <39902E69.67F50604@relog.ch> <3990310E.6C3EF59B@ivey.uwo.ca> <39903341.6195EF62@relog.ch> Content-Type: text/plain; charset=iso-8859-1 Sender: owner-linuxppc-dev@lists.linuxppc.org List-Id: Michel Dänzer wrote: > > Where or how do I go about getting the DRI CVS trunk? Is this a project > > on sourceforge? Is there anonymous cvs access? > > The great news is that I've just been added to the DRI project at > sourceforge (http://dri.sourceforge.net). I'll start a PPC branch which you > should be able to just checkout and build and it should work (and which will > eventually be integrated into the trunk of course :). Unfortunately, it takes some time for my write access to the repository to take effect (until some cron job at sourceforge adds me to group dri ;) . I've put a diff of the modifications I made up here for the impatient: http://n.ethz.ch/student/daenzerm/download/XFree86/dri.diff.bz2 Checking out the DRI CVS trunk and applying this patch should enable you to do 'make World; make install' and use DRI. YMMV :) Michel -- Earthling Michel Dänzer (MrCooper) \ CS student and free software enthusiast Debian GNU/Linux (powerpc,i386) user \ member of XFree86, Team *AMIGA*, AUGS ** Sent via the linuxppc-dev mail list. See http://lists.linuxppc.org/